think…mercer first®
Features:
- Designed with "Auto Seat Technology"®
- A low rated and fully guided spring allows for more consistent Set Pressures from pop to pop.
- Consistent Set Pressures allows for repeatable use without the need for excessive repairs or resetting.
- Open, Close, Seat and Seal™
- Fully guided disk for the proper alignment, opening and closing, and reseating of the valve.
- Mechanical Stop prevents wear on parts and controls valve lift.
- Pop Action relief allows the valve to go to full lift at Set Pressure. This helps with DOT regulated applications.
- Non-rising stems allowing valves to be installed in small areas.
- Sour Service Trim available.
- Additional options available to meet NACE MR0175 requirements.
- Canadian Registration Number (CRN)
- Additional options available to meet Conformité Européenne (CE) to PED Directive 2014/68/EU and/or ATEX Directive 2014/34/EU
| Orifice | M
(USC) | M
(SI) |
|---|---|---|
| OrificeStandard Inlet Sizes | M
(USC) 4" | M
(SI) DN 100 |
| OrificeInlet and Outlet Connection Types | M
(USC) RF x RF, RTJ x RF, RTJ x RTJ | M
(SI) RF x RF, RTJ x RF, RTJ x RTJ |
| OrificeActual Orifice Diameter | M
(USC) 2.280 in | M
(SI) 57.9 mm |
| OrificeActual Orifice Area | M
(USC) 4.080 in2 | M
(SI) 2632.3 mm2 |
| OrificeAPI Orifice Area | M
(USC) 3.600 in2 | M
(SI) 2322.36 mm2 |
| OrificePressure Range | M
(USC) 10 – 1000 psig | M
(SI) 69 – 6895 kPag |
| OrificeStandard Temperature Range | M
(USC) -20°F to 400°F | M
(SI) -29°C to 204°C |
| OrificeASME Flow Coefficient, Kd (Gas) | M
(USC) 0.818 | M
(SI) 0.818 |
| OrificeASME Flow Coefficient, Kd (Liquid) | M
(USC) 0.707 | M
(SI) 0.707 |
Mercer Valve Co., Inc. reserves the right to change product designs and specifications without notice.
9100 Flanged "M" | Part Number Selection
91 -
71
A
M
B
1
C
1
D
T
E
1N
F
U
G
1
H
I
A | INLET & OUTLET COMBINATION
(See Dimensions & Weights, below.)
B | API ORIFICE LETTER
M – 4.080 in²
C | INLET & OUTLET TYPE / BODY MATERIAL
1★ – RF x RF / WCB CARBON STEEL
3★ – RTJ x RF / WCB CARBON STEEL
2 – RF x RF / CF3M STAINLESS STEEL
4 – RTJ x RF / CF3M STAINLESS STEEL
A – RTJ x RTJ / WCB CARBON STEEL
B – RTJ x RTJ / CF3M STAINLESS STEEL
P – RF x RF / LCC CARBON STEEL
Q – RTJ x RF / LCC CARBON STEEL
D | CAP TYPE
1★ – CLOSED CAP
2 – OPEN LIFT LEVER
3 – CLOSED LIFT LEVER
E | SEAT MATERIAL
V★ – FKM
T★ – PTFE
P★ – VIRGIN PEEK
B – BUNA-N
E – EPDM
N – NEOPRENE
F – FKM (LOW TEMP)
F | SPRING CODE
(Spring codes assigned by Mercer Valve.)
G | TRIM CODES
U★ – 316 S.S. DISK & NOZZLE (GAS SERVICE)
L★ – 316 S.S. DISK & NOZZLE (LIQUID SERVICE)
N★ – 316 S.S. DISK & NOZZLE (SOUR GAS SERVICE)
B★ – 316 S.S. DISK & NOZZLE (SOUR LIQUID SERVICE)
X – ALL 316 S.S. (OPTIONAL GAS SERVICE)
LX – ALL 316 S.S. (OPTIONAL LIQUID SERVICE)
BX – ALL 316 S.S. (OPTIONAL SOUR LIQUID SERVICE)
NX – ALL 316 S.S. (OPTIONAL SOUR GAS SERVICE)
H | O-RING MATERIAL
1★ – FKM & BUNA-N (STANDARD)
2 – FKM 75 DURO
3 – FKM 90 DURO
4 – BUNA-N 70 DURO
5 – BUNA-N 75 DURO (LOW TEMP)
7 – FFKM
9 – NEOPRENE
A – CHEMRAZ®
C – EPDM 80 DURO
D – EPDM 90 DURO
G – TFE/P
H – SILICONE
J – FLUOROSILICONE
K – HNBR
L – PC BUNA
M – FKM ED
P – FKM 75 DURO (LOW TEMP)
I | TWO-DIGIT "SPECIAL" CODE
(Two-digit special codes assigned by Mercer Valve, if applicable.)
★Standard Materials or Options.
| Inlet and Outlet Code | Inlet and Outlet Size (in) | Pressure Limit 1, 2 (psig) | Dimensions 2
"A" x "B" x "C" (in ± .062) | Approximate Weight 2 (lbs) |
|---|---|---|---|---|
| Inlet and Outlet Code70★☆ | Inlet and Outlet Size (in) 4" 150 x 6" 150 | Pressure Limit 1, 2 (psig) 285 | Dimensions 2
"A" x "B" x "C" (in ± .062) 7.000 x 7.250 x 17.187 | Approximate Weight 2 (lbs) 150 |
| Inlet and Outlet Code71★☆ | Inlet and Outlet Size (in) 4" 300 x 6" 150 | Pressure Limit 1, 2 (psig) 740 | Dimensions 2
"A" x "B" x "C" (in ± .062) 7.000 x 7.250 x 17.187 | Approximate Weight 2 (lbs) 180 |
| Inlet and Outlet Code72★☆ | Inlet and Outlet Size (in) 4" 600 x 6" 150 | Pressure Limit 1, 2 (psig) 1000 | Dimensions 2
"A" x "B" x "C" (in ± .062) 7.000 x 8.000 x 17.187 | Approximate Weight 2 (lbs) 195 |
| Inlet and Outlet Code73★☆ | Inlet and Outlet Size (in) 4" 900 x 6" 150 | Pressure Limit 1, 2 (psig) 1000 | Dimensions 2
"A" x "B" x "C" (in ± .062) | Approximate Weight 2 (lbs) |
1Pressure limit may be subject to system conditions and temperatures.
2Pressure limit, weight, and “C” dimension may vary with sour gas service and other options.
★Standard Materials or Options.
☆Flange dimensions compliant with API 526.
| Inlet and Outlet Code | Inlet and Outlet Size DN (mm) | Pressure Limit 1, 2 (kPag) | Dimensions 1, 2 "A" x "B" x "C" (mm ± 1.6) | Approximate Weight 2 (kg) |
|---|---|---|---|---|
| Inlet and Outlet Code70★☆ | Inlet and Outlet Size DN (mm)DN 100 150 x DN 150 150 | Pressure Limit 1, 2 (kPag)1965 | Dimensions 1, 2 "A" x "B" x "C" (mm ± 1.6)177.8 x 184.2 x 436.6 | Approximate Weight 2 (kg)68.0 |
| Inlet and Outlet Code71★☆ | Inlet and Outlet Size DN (mm)DN 100 300 x DN 150 150 | Pressure Limit 1, 2 (kPag)5102 | Dimensions 1, 2 "A" x "B" x "C" (mm ± 1.6)177.8 x 184.2 x 436.6 | Approximate Weight 2 (kg)81.6 |
| Inlet and Outlet Code72★☆ | Inlet and Outlet Size DN (mm)DN 100 600 x DN 150 150 | Pressure Limit 1, 2 (kPag)6895 | Dimensions 1, 2 "A" x "B" x "C" (mm ± 1.6)177.8 x 203.2 x 436.2 | Approximate Weight 2 (kg)88.5 |
| Inlet and Outlet Code73★☆ | Inlet and Outlet Size DN (mm)DN 100 900 x DN 150 150 | Pressure Limit 1, 2 (kPag)6895 | Dimensions 1, 2 "A" x "B" x "C" (mm ± 1.6) | Approximate Weight 2 (kg) |
1Pressure limit may be subject to system conditions and temperatures.
2Pressure limit, weight, and “C” dimension may vary with sour gas service and other options.
★Standard Materials or Options.
☆Flange dimensions compliant with API 526.