Please ensure Javascript is enabled for purposes of website accessibility
9609 NW 4TH ST. OKLAHOMA CITY, OK 73127
(800) 833-6402 Contact Us

9100 Flanged “H” Orifice

Back to Products

think…mercer first®

9100 Flanged “H” Orifice
9100 Flanged H Side Updated
9100 Flanged H Front Updated
9100 H FLG - Cutaway - Outline NEW
9100 Flanged “H” Orifice
9100 Flanged H Side Updated
9100 Flanged H Front Updated
9100 H FLG - Cutaway - Outline NEW

Features:

  • Designed with "Auto Seat Technology"®
  • A low rated and fully guided spring allows for more consistent Set Pressures from pop to pop.
  • Consistent Set Pressures allows for repeatable use without the need for excessive repairs or resetting.
  • Open, Close, Seat and Seal™
  • Fully guided disk for the proper alignment, opening and closing, and reseating of the valve.
  • Mechanical Stop prevents wear on parts and controls valve lift.
  • Pop Action relief allows the valve to go to full lift at Set Pressure. This helps with DOT regulated applications.
  • Non-rising stems allowing valves to be installed in small areas.
  • Sour Service Trim available.
  • Additional options available to meet NACE MR0175 requirements.
  • Canadian Registration Number (CRN)
  • Additional options available to meet Conformité Européenne (CE) to PED Directive 2014/68/EU and/or ATEX Directive 2014/34/EU
Valve Shipping Flyers Repair Kit Flyers IOM Manuals Selection Dimensions
9100 Flanged "H" | Model Specifications
OrificeH
(USC) 		H
(SI)
OrificeStandard Inlet SizesH
(USC) 1 ½", 2"		H
(SI) DN 40, DN 50
OrificeInlet and Outlet Connection TypesH
(USC) RF x RF,
RTJ x RF,
RTJ x RTJ		H
(SI) RF x RF,
RTJ x RF,
RTJ x RTJ
OrificeActual Orifice DiameterH
(USC) 1.050 in		H
(SI) 26.7 mm
OrificeActual Orifice AreaH
(USC) 0.865 in2		H
(SI) 558.1 mm2
OrificeAPI Orifice AreaH
(USC) 0.785 in2		H
(SI) 506.5 mm2
OrificePressure RangeH
(USC) 10 – 2000 psig		H
(SI) 68 – 13789 kPa
OrificeStandard Temperature RangeH
(USC) -20°F to 400°F		H
(SI) -29°C to 204°C
OrificeASME Flow Coefficient, Kd (Gas)H
(USC) 0.818		H
(SI) 0.818
OrificeASME Flow Coefficient, Kd (Liquid)H
(USC) 0.707		H
(SI) 0.707

Mercer Valve Co., Inc. reserves the right to change product designs and specifications without notice.

9100 Flanged "H" | Part Number Selection

91 -
55
A
H
B
1
C
1
D
V
E
80
F
U
G
1
H
 
I

A | INLET & OUTLET COMBINATION

(See Dimensions & Weights, below.)

B | API ORIFICE LETTER

H – 0.865 in²

C | INLET & OUTLET TYPE / BODY MATERIAL

1★ – RF x RF / WCB CARBON STEEL
3★ – RTJ x RF / WCB CARBON STEEL
2 – RF x RF / CF3M STAINLESS STEEL
4 – RTJ x RF / CF3M STAINLESS STEEL
A – RTJ x RTJ / WCB CARBON STEEL
B – RTJ x RTJ / CF3M STAINLESS STEEL
P – RF x RF / LCC CARBON STEEL
Q – RTJ x RF / LCC CARBON STEEL

D | CAP TYPE

1★ – CLOSED CAP
2 – OPEN LIFT LEVER
3 – CLOSED LIFT LEVER

E | SEAT MATERIAL

V★ – FKM
T★ – PTFE
P★ – VIRGIN PEEK
B – BUNA-N
E – EPDM
N – NEOPRENE
X – FFKM
Y – VESPEL®
L – PC BUNA
F – FKM (LOW TEMP)

F | SPRING CODE

(Spring codes assigned by Mercer Valve.)

G | TRIM CODES

U★ – 316 S.S. DISK & NOZZLE (GAS SERVICE ≤ 1050 PSIG)
C★ – 440C S.S. DISK, 17-4 S.S. NOZZLE (GAS SERVICE > 1050 PSIG)
L★ – 316 S.S. DISK & NOZZLE (LIQUID SERVICE)
N★ – 316 S.S. DISK & NOZZLE (SOUR GAS SERVICE)
B★ – 316 S.S. DISK & NOZZLE (SOUR LIQUID SERVICE)
X – ALL 316 S.S. (OPTIONAL GAS SERVICE)
LX – ALL 316 S.S. (OPTIONAL LIQUID SERVICE)
BX – ALL 316 S.S. (OPTIONAL SOUR LIQUID SERVICE)
NX – ALL 316 S.S. (OPTIONAL SOUR GAS SERVICE)

H | O-RING MATERIAL

1★ – FKM & BUNA-N (STANDARD)
2 – FKM 75 DURO
3 – FKM 90 DURO
4 – BUNA-N 70 DURO
5 – BUNA-N 75 DURO (LOW TEMP)
7 – FFKM
9 – NEOPRENE
A – CHEMRAZ®
C – EPDM 80 DURO
D – EPDM 90 DURO
G – TFE/P
H – SILICONE
J – FLUOROSILICONE
K – HNBR
L – PC BUNA
M – FKM ED
P – FKM 75 DURO (LOW TEMP)

I | TWO-DIGIT "SPECIAL" CODE

(Two-digit special codes assigned by Mercer Valve, if applicable.)

★Standard Materials or Options.

9100 Flanged "H" | Dimensions & Weights (USC)
Inlet and Outlet CodeInlet and Outlet Size
(in) 		Pressure Limit 1, 2
(psig) 		Dimensions 2
"A" x "B" x "C"
(in ± .062) 		Approximate Weight 2
(lbs)
Inlet and Outlet Code33Inlet and Outlet Size
(in) 1 ½" 150 x 2" 150		Pressure Limit 1, 2
(psig) 285		Dimensions 2
"A" x "B" x "C"
(in ± .062) 4.875 x 4.750 x 12.625		Approximate Weight 2
(lbs) 35
Inlet and Outlet Code34Inlet and Outlet Size
(in) 1 ½" 300 x 2" 150		Pressure Limit 1, 2
(psig) 740		Dimensions 2
"A" x "B" x "C"
(in ± .062) 4.875 x 4.750 x 12.625		Approximate Weight 2
(lbs) 37
Inlet and Outlet Code35Inlet and Outlet Size
(in) 1 ½" 600 x 2" 150		Pressure Limit 1, 2
(psig) 850		Dimensions 2
"A" x "B" x "C"
(in ± .062) 4.875 x 4.750 x 12.625		Approximate Weight 2
(lbs) 38
Inlet and Outlet Code37Inlet and Outlet Size
(in) 1 ½" 150 x 2 ½" 150		Pressure Limit 1, 2
(psig) 285		Dimensions 2
"A" x "B" x "C"
(in ± .062) 4.875 x 4.750 x 12.625		Approximate Weight 2
(lbs)
Inlet and Outlet Code38Inlet and Outlet Size
(in) 1 ½" 300 x 2 ½" 150		Pressure Limit 1, 2
(psig) 740		Dimensions 2
"A" x "B" x "C"
(in ± .062) 4.875 x 4.750 x 12.625		Approximate Weight 2
(lbs)
Inlet and Outlet Code39Inlet and Outlet Size
(in) 1 ½" 600 x 2 ½" 150		Pressure Limit 1, 2
(psig) 850		Dimensions 2
"A" x "B" x "C"
(in ± .062) 4.875 x 6.000 x 12.625		Approximate Weight 2
(lbs)
Inlet and Outlet Code55★☆Inlet and Outlet Size
(in) 1 ½" 150 x 3" 150		Pressure Limit 1, 2
(psig) 285		Dimensions 2
"A" x "B" x "C"
(in ± .062) 5.125 x 4.875 x 12.875		Approximate Weight 2
(lbs) 38
Inlet and Outlet Code56★Inlet and Outlet Size
(in) 1 ½" 300 x 3" 150		Pressure Limit 1, 2
(psig) 740		Dimensions 2
"A" x "B" x "C"
(in ± .062) 5.125 x 4.875 x 12.875		Approximate Weight 2
(lbs) 42
Inlet and Outlet Code74★Inlet and Outlet Size
(in) 1 ½" 600 x 3" 150		Pressure Limit 1, 2
(psig) 850		Dimensions 2
"A" x "B" x "C"
(in ± .062) 5.125 x 4.875 x 12.875		Approximate Weight 2
(lbs)
Inlet and Outlet Code42Inlet and Outlet Size
(in) 2" 150 x 2" 150		Pressure Limit 1, 2
(psig) 285		Dimensions 2
"A" x "B" x "C"
(in ± .062) 4.875 x 4.750 x 12.625		Approximate Weight 2
(lbs) 36
Inlet and Outlet Code43Inlet and Outlet Size
(in) 2" 300 x 2" 150		Pressure Limit 1, 2
(psig) 740		Dimensions 2
"A" x "B" x "C"
(in ± .062) 4.875 x 4.750 x 12.625		Approximate Weight 2
(lbs) 39
Inlet and Outlet Code44Inlet and Outlet Size
(in) 2" 600 x 2" 150		Pressure Limit 1, 2
(psig) 850		Dimensions 2
"A" x "B" x "C"
(in ± .062) 4.875 x 4.750 x 12.625		Approximate Weight 2
(lbs) 40
Inlet and Outlet Code46★Inlet and Outlet Size
(in) 2" 150 x 2 ½" 150		Pressure Limit 1, 2
(psig) 285		Dimensions 2
"A" x "B" x "C"
(in ± .062) 4.875 x 4.750 x 12.625		Approximate Weight 2
(lbs) 39
Inlet and Outlet Code47★Inlet and Outlet Size
(in) 2" 300 x 2 ½" 150		Pressure Limit 1, 2
(psig) 740		Dimensions 2
"A" x "B" x "C"
(in ± .062) 4.875 x 4.750 x 12.625		Approximate Weight 2
(lbs) 41
Inlet and Outlet Code48★Inlet and Outlet Size
(in) 2" 600 x 2 ½" 150		Pressure Limit 1, 2
(psig) 1480		Dimensions 2
"A" x "B" x "C"
(in ± .062) 4.875 x 6.000 x 12.625		Approximate Weight 2
(lbs) 48
Inlet and Outlet Code89★Inlet and Outlet Size
(in) 2" 900 x 2 ½" 150		Pressure Limit 1, 2
(psig) 2000		Dimensions 2
"A" x "B" x "C"
(in ± .062) 6.062 x 6.000 x 13.812		Approximate Weight 2
(lbs) 60
Inlet and Outlet Code96★Inlet and Outlet Size
(in) 2" 1500 x 2 ½" 300		Pressure Limit 1, 2
(psig) 2000		Dimensions 2
"A" x "B" x "C"
(in ± .062) 6.062 x 6.000 x 13.812		Approximate Weight 2
(lbs)
Inlet and Outlet Code51★Inlet and Outlet Size
(in) 2" 150 x 3" 150		Pressure Limit 1, 2
(psig) 285		Dimensions 2
"A" x "B" x "C"
(in ± .062) 5.125 x 4.875 x 12.875		Approximate Weight 2
(lbs)
Inlet and Outlet Code52★☆Inlet and Outlet Size
(in) 2" 300 x 3" 150		Pressure Limit 1, 2
(psig) 740		Dimensions 2
"A" x "B" x "C"
(in ± .062) 5.125 x 4.875 x 12.875		Approximate Weight 2
(lbs) 38
Inlet and Outlet Code53★☆Inlet and Outlet Size
(in) 2" 600 x 3" 150		Pressure Limit 1, 2
(psig) 1480		Dimensions 2
"A" x "B" x "C"
(in ± .062) 6.063 x 6.375 x 13.813		Approximate Weight 2
(lbs) 40
Inlet and Outlet Code91★☆Inlet and Outlet Size
(in) 2" 900 x 3" 150		Pressure Limit 1, 2
(psig) 2000		Dimensions 2
"A" x "B" x "C"
(in ± .062) 6.063 x 6.375 x 13.813		Approximate Weight 2
(lbs) 58
Inlet and Outlet Code97★☆Inlet and Outlet Size
(in) 2" 1500 x 3" 300		Pressure Limit 1, 2
(psig) 2000		Dimensions 2
"A" x "B" x "C"
(in ± .062) 6.063 x 6.375 x 13.813		Approximate Weight 2
(lbs)

1Pressure limit may be subject to system conditions and temperatures.
2Pressure limit, weight, and “C” dimension may vary with sour gas service and other options.
★Standard Materials or Options.
☆Flange dimensions compliant with API 526.

9100 Flanged "H" | Dimensions & Weights (SI)
Inlet and Outlet CodeInlet and Outlet Size
DN (mm)		Pressure Limit 1, 2
(kPa)		Dimensions 2
"A" x "B" x "C"
(mm ± 1.6)		Approximate Weight
(kg)
Inlet and Outlet Code33Inlet and Outlet Size
DN (mm)DN 40 150 x DN 50 150		Pressure Limit 1, 2
(kPa)1965		Dimensions 2
"A" x "B" x "C"
(mm ± 1.6)123.8 x 120.7 x 320.7		Approximate Weight
(kg)15.9
Inlet and Outlet Code34Inlet and Outlet Size
DN (mm)DN 40 300 x DN 50 150		Pressure Limit 1, 2
(kPa)5102		Dimensions 2
"A" x "B" x "C"
(mm ± 1.6)123.8 x 120.7 x 320.7		Approximate Weight
(kg)16.8
Inlet and Outlet Code35Inlet and Outlet Size
DN (mm)DN 40 600 x DN 50 150		Pressure Limit 1, 2
(kPa)5860		Dimensions 2
"A" x "B" x "C"
(mm ± 1.6)123.8 x 120.7 x 320.7		Approximate Weight
(kg)17.2
Inlet and Outlet Code37Inlet and Outlet Size
DN (mm)DN 40 150 x DN 65 150		Pressure Limit 1, 2
(kPa)1965		Dimensions 2
"A" x "B" x "C"
(mm ± 1.6)123.8 x 120.7 x 320.7		Approximate Weight
(kg)15.9
Inlet and Outlet Code38Inlet and Outlet Size
DN (mm)DN 40 300 x DN 65 150		Pressure Limit 1, 2
(kPa)5102		Dimensions 2
"A" x "B" x "C"
(mm ± 1.6)123.8 x 120.7 x 320.7		Approximate Weight
(kg)16.8
Inlet and Outlet Code39Inlet and Outlet Size
DN (mm)DN 40 600 x DN 65 150		Pressure Limit 1, 2
(kPa)5860		Dimensions 2
"A" x "B" x "C"
(mm ± 1.6)123.8 x 120.7 x 320.7		Approximate Weight
(kg)17.2
Inlet and Outlet Code55★☆Inlet and Outlet Size
DN (mm)DN 40 150 x DN 80 150		Pressure Limit 1, 2
(kPa)1965		Dimensions 2
"A" x "B" x "C"
(mm ± 1.6)130.2 x 123.8 x 327.0		Approximate Weight
(kg)17.2
Inlet and Outlet Code56★Inlet and Outlet Size
DN (mm)DN 40 300 x DN 80 150		Pressure Limit 1, 2
(kPa)5102		Dimensions 2
"A" x "B" x "C"
(mm ± 1.6)130.2 x 123.8 x 327.0		Approximate Weight
(kg)19.1
Inlet and Outlet Code74★Inlet and Outlet Size
DN (mm)DN 40 600 x DN 80 150		Pressure Limit 1, 2
(kPa)5860		Dimensions 2
"A" x "B" x "C"
(mm ± 1.6)130.2 x 123.8 x 327.0		Approximate Weight
(kg)
Inlet and Outlet Code42Inlet and Outlet Size
DN (mm)DN 50 150 x DN 50 150		Pressure Limit 1, 2
(kPa)1965		Dimensions 2
"A" x "B" x "C"
(mm ± 1.6)123.8 x 120.7 x 320.7		Approximate Weight
(kg)16.3
Inlet and Outlet Code43Inlet and Outlet Size
DN (mm)DN 50 300 x DN 50 150		Pressure Limit 1, 2
(kPa)5102		Dimensions 2
"A" x "B" x "C"
(mm ± 1.6)123.8 x 120.7 x 320.7		Approximate Weight
(kg)17.7
Inlet and Outlet Code44Inlet and Outlet Size
DN (mm)DN 50 600 x DN 50 150		Pressure Limit 1, 2
(kPa)5860		Dimensions 2
"A" x "B" x "C"
(mm ± 1.6)123.8 x 152.4 x 320.7		Approximate Weight
(kg)18.1
Inlet and Outlet Code46★Inlet and Outlet Size
DN (mm)DN 50 150 x DN 65 150		Pressure Limit 1, 2
(kPa)1965		Dimensions 2
"A" x "B" x "C"
(mm ± 1.6)154.0 x 152.4 x 296.9		Approximate Weight
(kg)17.7
Inlet and Outlet Code47★Inlet and Outlet Size
DN (mm)DN 50 300 x DN 65 150		Pressure Limit 1, 2
(kPa)5102		Dimensions 2
"A" x "B" x "C"
(mm ± 1.6)123.8 x 120.7 x 320.7		Approximate Weight
(kg)18.6
Inlet and Outlet Code48★Inlet and Outlet Size
DN (mm)DN 50 600 x DN 65 150		Pressure Limit 1, 2
(kPa)5860		Dimensions 2
"A" x "B" x "C"
(mm ± 1.6)123.8 x 152.4 x 385.8		Approximate Weight
(kg)21.8
Inlet and Outlet Code89★Inlet and Outlet Size
DN (mm)DN 50 900 x DN 65 150		Pressure Limit 1, 2
(kPa)13789		Dimensions 2
"A" x "B" x "C"
(mm ± 1.6)154.0 x 152.4 x 350.8		Approximate Weight
(kg)27.2
Inlet and Outlet Code96★Inlet and Outlet Size
DN (mm)DN 50 1500 x DN 65 300		Pressure Limit 1, 2
(kPa)13789		Dimensions 2
"A" x "B" x "C"
(mm ± 1.6)154.0 x 152.4 x 350.8		Approximate Weight
(kg)
Inlet and Outlet Code51★Inlet and Outlet Size
DN (mm)DN 50 150 x DN 80 150		Pressure Limit 1, 2
(kPa)1965		Dimensions 2
"A" x "B" x "C"
(mm ± 1.6)130.2 x 123.8 x 327.0		Approximate Weight
(kg)
Inlet and Outlet Code52★☆Inlet and Outlet Size
DN (mm)DN 50 300 x DN 80 150		Pressure Limit 1, 2
(kPa)5102		Dimensions 2
"A" x "B" x "C"
(mm ± 1.6)130.2 x 123.8 x 327.0		Approximate Weight
(kg)
Inlet and Outlet Code53★☆Inlet and Outlet Size
DN (mm)DN 50 600 x DN 80 150		Pressure Limit 1, 2
(kPa)5860		Dimensions 2
"A" x "B" x "C"
(mm ± 1.6)154.0 x 161.9 x 333.4		Approximate Weight
(kg)18.1
Inlet and Outlet Code91★☆Inlet and Outlet Size
DN (mm)DN 50 900 x DN 80 150		Pressure Limit 1, 2
(kPa)13789		Dimensions 2
"A" x "B" x "C"
(mm ± 1.6)154.0 x 161.9 x 333.4		Approximate Weight
(kg)26.3
Inlet and Outlet Code97★☆Inlet and Outlet Size
DN (mm)DN 50 1500 x DN 80 300		Pressure Limit 1, 2
(kPa)13789		Dimensions 2
"A" x "B" x "C"
(mm ± 1.6)154.0 x 161.9 x 333.4		Approximate Weight
(kg)

1Pressure limit may be subject to system conditions and temperatures.
2Pressure limit, weight, and “C” dimension may vary with sour gas service and other options.
★Standard Materials or Options.
☆Flange dimensions compliant with API 526.