Please ensure Javascript is enabled for purposes of website accessibility
9609 NW 4TH ST. OKLAHOMA CITY, OK 73127
(800) 833-6402 Contact Us

9100 Flanged “D” Orifice

Back to Products

think…mercer first®

9100 Flanged “D” Orifice
9100 1-Inch Side Updated
9100 1-Inch Front Updated
9100 D FLG - 1in. Cutaway - Outline NEW
9100 2-Inch 45 Degrees Updated
9100 2-Inch Side Updated
9100 2-Inch Front Updated
9100 D FLG - 1in. Cutaway - Outline NEW
9100 Flanged “D” Orifice
9100 1-Inch Side Updated
9100 1-Inch Front Updated
9100 D FLG - 1in. Cutaway - Outline NEW
9100 2-Inch 45 Degrees Updated
9100 2-Inch Side Updated
9100 2-Inch Front Updated
9100 D FLG - 1in. Cutaway - Outline NEW

Features:

  • Designed with "Auto Seat Technology"®
  • A low rated and fully guided spring allows for more consistent Set Pressures from pop to pop.
  • Consistent Set Pressures allows for repeatable use without the need for excessive repairs or resetting.
  • Open, Close, Seat and Seal™
  • Fully guided disk for the proper alignment, opening and closing, and reseating of the valve.
  • Mechanical Stop prevents wear on parts and controls valve lift.
  • Pop Action relief allows the valve to go to full lift at Set Pressure. This helps with DOT regulated applications.
  • Non-rising stems allowing valves to be installed in small areas.
  • Sour Service Trim available.
  • Additional options available to meet NACE MR0175 requirements.
  • Canadian Registration Number (CRN)
  • Additional options available to meet Conformité Européenne (CE) to PED Directive 2014/68/EU and/or ATEX Directive 2014/34/EU
Valve Shipping Flyers Repair Kit Flyers IOM Manuals Selection Dimensions
9100 Flanged "D" | Model Specifications
OrificeD
(USC)		D
(SI)
OrificeStandard Inlet SizesD
(USC)¾", 1", 1 ½", 2"		D
(SI)DN 20, DN 25, DN 40, DN 50
OrificeInlet and Outlet Connection TypesD
(USC)RF x RF,
RTJ x RF,
RTJ x RTJ		D
(SI)RF x RF,
RTJ x RF,
RTJ x RTJ
OrificeActual Orifice DiameterD
(USC)0.394 in		D
(SI)10.0 mm
OrificeActual Orifice AreaD
(USC)0.122 in2		D
(SI)78.7 mm2
OrificeAPI Orifice AreaD
(USC)0.110 in2		D
(SI)71.0 mm2
OrificePressure RangeD
(USC)10 – 3500 psig		D
(SI)68 - 24131 kPa
OrificeStandard Temperature RangeD
(USC)-20°F to 400°F		D
(SI)-29°C to 204°C
OrificeASME Flow Coefficient, Kd (Gas)D
(USC)0.818		D
(SI)0.818
OrificeASME Flow Coefficient, Kd (Liquid)D
(USC)0.707		D
(SI)0.707

Mercer Valve Co., Inc. reserves the right to change product designs and specifications without notice.

9100 Flanged "D" | Part Number Selection

91 -
17
A
D
B
1
C
1
D
T
E
11
F
U
G
1
H
 
I

A | INLET & OUTLET COMBINATION

(See Dimensions & Weights, below.)

B | API ORIFICE LETTER

D – 0.122 in²

C | INLET & OUTLET TYPE / BODY MATERIAL

1★ – RF x RF / WCB CARBON STEEL
3★ – RTJ x RF / WCB CARBON STEEL
2 – RF x RF / CF3M STAINLESS STEEL
4 – RTJ x RF / CF3M STAINLESS STEEL
A – RTJ x RTJ / WCB CARBON STEEL
B – RTJ x RTJ / CF3M STAINLESS STEEL
P – RF x RF / LCC TEMP CARBON STEEL
Q – RTJ x RF / LCC TEMP CARBON STEEL

D | CAP TYPE

1★ – CLOSED CAP
2 – OPEN LIFT LEVER
3 – CLOSED LIFT LEVER

E | SEAT MATERIAL

V★ – FKM
T★ – PTFE
P★ – VIRGIN PEEK
B – BUNA-N
E – EPDM
N – NEOPRENE
X – FFKM
Y – VESPEL®
L – PC BUNA
F – FKM (LOW TEMP)

F | SPRING CODE

(Spring codes assigned by Mercer Valve.)

G | TRIM CODES

I★ – 17-4 S.S DISK & NOZZLE (STD GAS SERVICE)
L★ – 316 S.S. DISK & NOZZLE (LIQUID SERVICE)
N★ – 316 S.S. DISK & NOZZLE (SOUR GAS SERVICE)
B★ – 316 S.S. DISK & NOZZLE (SOUR LIQUID SERVICE)
U – 316 S.S. DISK & NOZZLE (OPTIONAL GAS SERVICE)
C – 440C S.S. DISK, 17-4 S.S. NOZZLE (OPTIONAL GAS SERVICE)
X – ALL 316 S.S. (OPTIONAL GAS SERVICE)
LX – ALL 316 S.S. (OPTIONAL LIQUID SERVICE)
BX – ALL 316 S.S. (OPTIONAL SOUR LIQUID SERVICE)
NX – ALL 316 S.S. (OPTIONAL SOUR GAS SERVICE)

H | O-RING MATERIAL

1★ – (FKM & BUNA-N)
2 – FKM 75 DURO
3 – FKM 90 DURO
4 – BUNA-N 70 DURO
5 – BUNA-N (LOW TEMP) 75 DURO
6 – FFKM 75 DURO
7 – FFKM 90 DURO
9 – NEOPRENE 70 DURO
A – CHEMRAZ® 505
C – EPDM 80 DURO
D – EPDM 90 DURO
F – PTFE
G – TFE/P 80
H – SILICONE 70 DURO
J – FLUOROSILICONE 70 DURO
K – HNBR
L – PC BUNA
M – FKM ED
P – FKM (LOW TEMP) 75 DURO

I | TWO-DIGIT "SPECIAL" CODE

(Two-digit special codes assigned by Mercer Valve, if applicable.)

★Standard Materials or Options.

9100 Flanged "D" | Dimensions & Weights (USC)
Inlet and Outlet CodeInlet and Outlet Size
(in)		Pressure Limit 1, 2
(psig)		Dimensions 2
"A" x "B" x "C"
(in ± .062)		Approximate Weight 2
(lbs)
Inlet and Outlet Code05Inlet and Outlet Size
(in)½" 150 x 1" 150		Pressure Limit 1, 2
(psig)285		Dimensions 2
"A" x "B" x "C"
(in ± .062)3.375 x 4.500 x 8.188		Approximate Weight 2
(lbs)
Inlet and Outlet Code06Inlet and Outlet Size
(in)½" 300 x 1" 150		Pressure Limit 1, 2
(psig)740		Dimensions 2
"A" x "B" x "C"
(in ± .062)3.375 x 4.500 x 8.188		Approximate Weight 2
(lbs)
Inlet and Outlet Code07Inlet and Outlet Size
(in)½" 600 x 1" 150		Pressure Limit 1, 2
(psig)1480		Dimensions 2
"A" x "B" x "C"
(in ± .062)3.375 x 4.500 x 8.188		Approximate Weight 2
(lbs)
Inlet and Outlet Code08Inlet and Outlet Size
(in)½" 900 x 1" 300		Pressure Limit 1, 2
(psig)2220		Dimensions 2
"A" x "B" x "C"
(in ± .062)3.750 x 4.500 x 8.563		Approximate Weight 2
(lbs)
Inlet and Outlet Code09Inlet and Outlet Size
(in)½" 1500 x 1" 300		Pressure Limit 1, 2
(psig)2999		Dimensions 2
"A" x "B" x "C"
(in ± .062)3.750 x 4.500 x 8.563		Approximate Weight 2
(lbs)
Inlet and Outlet Code11★Inlet and Outlet Size
(in)¾" 150 x 1" 150		Pressure Limit 1, 2
(psig)285		Dimensions 2
"A" x "B" x "C"
(in ± .062)4.125 x 4.500 x 8.938		Approximate Weight 2
(lbs) 9
Inlet and Outlet Code12★Inlet and Outlet Size
(in)¾" 300 x 1" 150		Pressure Limit 1, 2
(psig)740		Dimensions 2
"A" x "B" x "C"
(in ± .062)4.125 x 4.500 x 8.938		Approximate Weight 2
(lbs) 10
Inlet and Outlet Code13★Inlet and Outlet Size
(in)¾" 600 x 1" 150		Pressure Limit 1, 2
(psig)1480		Dimensions 2
"A" x "B" x "C"
(in ± .062)4.125 x 4.500 x 8.938		Approximate Weight 2
(lbs) 11
Inlet and Outlet Code14★Inlet and Outlet Size
(in)¾" 900 x 1" 300		Pressure Limit 1, 2
(psig)2220		Dimensions 2
"A" x "B" x "C"
(in ± .062)4.125 x 4.500 x 8.938		Approximate Weight 2
(lbs) 14
Inlet and Outlet Code15★Inlet and Outlet Size
(in)¾" 1500 x 1" 300		Pressure Limit 1, 2
(psig)2999		Dimensions 2
"A" x "B" x "C"
(in ± .062)4.125 x 4.500 x 8.938		Approximate Weight 2
(lbs) 14
Inlet and Outlet Code16★Inlet and Outlet Size
(in)1" 150 x 1" 150		Pressure Limit 1, 2
(psig)285		Dimensions 2
"A" x "B" x "C"
(in ± .062)4.125 x 4.500 x 8.938		Approximate Weight 2
(lbs) 12
Inlet and Outlet Code17★Inlet and Outlet Size
(in)1" 300 x 1" 150		Pressure Limit 1, 2
(psig)740		Dimensions 2
"A" x "B" x "C"
(in ± .062)4.125 x 4.500 x 8.938		Approximate Weight 2
(lbs) 13
Inlet and Outlet Code18★Inlet and Outlet Size
(in)1" 600 x 1" 150		Pressure Limit 1, 2
(psig)1480		Dimensions 2
"A" x "B" x "C"
(in ± .062)4.125 x 4.500 x 8.938		Approximate Weight 2
(lbs) 14
Inlet and Outlet Code19★Inlet and Outlet Size
(in)1" 900 x 1" 300		Pressure Limit 1, 2
(psig)2220		Dimensions 2
"A" x "B" x "C"
(in ± .062)4.125 x 4.500 x 8.938		Approximate Weight 2
(lbs) 18
Inlet and Outlet Code21★Inlet and Outlet Size
(in)1" 1500 x 1" 300		Pressure Limit 1, 2
(psig)2999		Dimensions 2
"A" x "B" x "C"
(in ± .062)4.125 x 4.500 x 8.938		Approximate Weight 2
(lbs) 18
Inlet and Outlet Code22Inlet and Outlet Size
(in)1" 150 x 1 ½" 150		Pressure Limit 1, 2
(psig)285		Dimensions 2
"A" x "B" x "C"
(in ± .062)4.125 x 4.500 x 8.938		Approximate Weight 2
(lbs) 13
Inlet and Outlet Code23Inlet and Outlet Size
(in)1" 300 x 1 ½" 150		Pressure Limit 1, 2
(psig)740		Dimensions 2
"A" x "B" x "C"
(in ± .062)4.125 x 4.500 x 8.938		Approximate Weight 2
(lbs) 14
Inlet and Outlet Code24Inlet and Outlet Size
(in)1" 600 x 1 ½" 150		Pressure Limit 1, 2
(psig)1480		Dimensions 2
"A" x "B" x "C"
(in ± .062)4.875 x 4.500 x 10.500		Approximate Weight 2
(lbs) 15
Inlet and Outlet Code25Inlet and Outlet Size
(in)1" 900 x 1 ½" 300		Pressure Limit 1, 2
(psig)2220		Dimensions 2
"A" x "B" x "C"
(in ± .062)5.250 x 5.500 x 10.875		Approximate Weight 2
(lbs) 19
Inlet and Outlet Code26Inlet and Outlet Size
(in)1" 1500 x 1 ½" 300		Pressure Limit 1, 2
(psig)2999		Dimensions 2
"A" x "B" x "C"
(in ± .062)5.250 x 5.500 x 10.875		Approximate Weight 2
(lbs) 19
Inlet and Outlet Code27★☆Inlet and Outlet Size
(in)1" 150 x 2" 150		Pressure Limit 1, 2
(psig)285		Dimensions 2
"A" x "B" x "C"
(in ± .062)4.125 x 4.500 x 8.938		Approximate Weight 2
(lbs) 14
Inlet and Outlet Code28★☆Inlet and Outlet Size
(in)1" 300 x 2" 150		Pressure Limit 1, 2
(psig)740		Dimensions 2
"A" x "B" x "C"
(in ± .062)4.125 x 4.500 x 8.938		Approximate Weight 2
(lbs) 15
Inlet and Outlet Code29★☆Inlet and Outlet Size
(in)1" 600 x 2" 150		Pressure Limit 1, 2
(psig)1480		Dimensions 2
"A" x "B" x "C"
(in ± .062)4.125 x 4.500 x 8.938		Approximate Weight 2
(lbs) 16
Inlet and Outlet Code31Inlet and Outlet Size
(in)1" 900 x 2" 300		Pressure Limit 1, 2
(psig)2220		Dimensions 2
"A" x "B" x "C"
(in ± .062)5.250 x 5.500 x 10.875		Approximate Weight 2
(lbs) 24
Inlet and Outlet Code32Inlet and Outlet Size
(in)1" 1500 x 2" 300		Pressure Limit 1, 2
(psig)2999		Dimensions 2
"A" x "B" x "C"
(in ± .062)5.250 x 5.500 x 10.875		Approximate Weight 2
(lbs) 24
Inlet and Outlet Code33Inlet and Outlet Size
(in)1 ½" 150 x 2" 150		Pressure Limit 1, 2
(psig)285		Dimensions 2
"A" x "B" x "C"
(in ± .062)4.875 x 4.750 x 10.500		Approximate Weight 2
(lbs) 22
Inlet and Outlet Code34Inlet and Outlet Size
(in)1 ½" 300 x 2" 150		Pressure Limit 1, 2
(psig)740		Dimensions 2
"A" x "B" x "C"
(in ± .062)4.875 x 6.000 x 10.500		Approximate Weight 2
(lbs) 25
Inlet and Outlet Code35Inlet and Outlet Size
(in)1 ½" 600 x 2" 150		Pressure Limit 1, 2
(psig)1480		Dimensions 2
"A" x "B" x "C"
(in ± .062)4.875 x 6.000 x 10.500		Approximate Weight 2
(lbs) 26
Inlet and Outlet Code36★☆Inlet and Outlet Size
(in)1 ½" 900 x 2" 300		Pressure Limit 1, 2
(psig)2220		Dimensions 2
"A" x "B" x "C"
(in ± .062)4.125 x 5.500 x 9.748		Approximate Weight 2
(lbs) 31
Inlet and Outlet Code92★☆Inlet and Outlet Size
(in)1 ½" 1500 x 2" 300		Pressure Limit 1, 2
(psig)3500		Dimensions 2
"A" x "B" x "C"
(in ± .062)4.125 x 5.500 x 9.748		Approximate Weight 2
(lbs) 31
Inlet and Outlet Code42Inlet and Outlet Size
(in)2" 150 x 2" 150		Pressure Limit 1, 2
(psig)285		Dimensions 2
"A" x "B" x "C"
(in ± .062)4.875 x 4.750 x 10.500		Approximate Weight 2
(lbs) 24
Inlet and Outlet Code43Inlet and Outlet Size
(in)2" 300 x 2" 150		Pressure Limit 1, 2
(psig)740		Dimensions 2
"A" x "B" x "C"
(in ± .062)4.875 x 4.750 x 10.500		Approximate Weight 2
(lbs) 26
Inlet and Outlet Code44Inlet and Outlet Size
(in)2" 600 x 2" 150		Pressure Limit 1, 2
(psig)1480		Dimensions 2
"A" x "B" x "C"
(in ± .062)5.375 x 6.000 x 11.000		Approximate Weight 2
(lbs) 29
Inlet and Outlet Code45Inlet and Outlet Size
(in)2" 900 x 2" 300		Pressure Limit 1, 2
(psig)2220		Dimensions 2
"A" x "B" x "C"
(in ± .062)6.063 x 6.000 x 11.688		Approximate Weight 2
(lbs) 46
Inlet and Outlet Code95Inlet and Outlet Size
(in)2" 1500 x 2" 300		Pressure Limit 1, 2
(psig)3500		Dimensions 2
"A" x "B" x "C"
(in ± .062)6.063 x 6.000 x 11.688		Approximate Weight 2
(lbs)

1Pressure limit may be subject to system conditions and temperatures.
2Pressure limit, weight, and “C” dimension may vary with sour gas service and other options.
★Standard Materials or Options.
☆Flange dimensions compliant with API 526.

9100 Flanged "D" | Dimensions & Weights (SI)
Inlet and Outlet CodeInlet and Outlet Size
DN (mm)		Pressure Limit 1, 2
(kPa)		Dimensions 2
"A" x "B" x "C"
(mm ± 1.6)		Approximate Weight 2
(kg)
Inlet and Outlet Code05Inlet and Outlet Size
DN (mm)DN 15 150 x DN 25 150		Pressure Limit 1, 2
(kPa)1965		Dimensions 2
"A" x "B" x "C"
(mm ± 1.6)85.7 x 114.3 x 208.0 		Approximate Weight 2
(kg)
Inlet and Outlet Code06Inlet and Outlet Size
DN (mm)DN 15 300 x DN 25 150		Pressure Limit 1, 2
(kPa)5102		Dimensions 2
"A" x "B" x "C"
(mm ± 1.6)85.7 x 114.3 x 208.0 		Approximate Weight 2
(kg)
Inlet and Outlet Code07Inlet and Outlet Size
DN (mm)DN 15 600 x DN 25 150		Pressure Limit 1, 2
(kPa)10204		Dimensions 2
"A" x "B" x "C"
(mm ± 1.6)85.7 x 114.3 x 208.0 		Approximate Weight 2
(kg)
Inlet and Outlet Code08Inlet and Outlet Size
DN (mm)DN 15 900 x DN 25 300		Pressure Limit 1, 2
(kPa)15306		Dimensions 2
"A" x "B" x "C"
(mm ± 1.6)95.3 x 114.3 x 217.5 		Approximate Weight 2
(kg)
Inlet and Outlet Code09Inlet and Outlet Size
DN (mm)DN 15 1500 x DN 25 300		Pressure Limit 1, 2
(kPa)20677		Dimensions 2
"A" x "B" x "C"
(mm ± 1.6)95.3 x 114.3 x 217.5 		Approximate Weight 2
(kg)
Inlet and Outlet Code11★Inlet and Outlet Size
DN (mm)DN 20 150 x DN 25 150		Pressure Limit 1, 2
(kPa)1965		Dimensions 2
"A" x "B" x "C"
(mm ± 1.6)104.8 x 114.3 x 228.6 		Approximate Weight 2
(kg) 4.1
Inlet and Outlet Code12★Inlet and Outlet Size
DN (mm)DN 20 300 x DN 25 150		Pressure Limit 1, 2
(kPa)5102		Dimensions 2
"A" x "B" x "C"
(mm ± 1.6)104.8 x 114.3 x 228.6 		Approximate Weight 2
(kg) 4.5
Inlet and Outlet Code13★Inlet and Outlet Size
DN (mm)DN 20 600 x DN 25 150		Pressure Limit 1, 2
(kPa)10204		Dimensions 2
"A" x "B" x "C"
(mm ± 1.6)104.8 x 114.3 x 228.6 		Approximate Weight 2
(kg) 5.0
Inlet and Outlet Code14★Inlet and Outlet Size
DN (mm)DN 20 900 x DN 25 300		Pressure Limit 1, 2
(kPa)15306		Dimensions 2
"A" x "B" x "C"
(mm ± 1.6)104.8 x 114.3 x 228.6 		Approximate Weight 2
(kg) 6.4
Inlet and Outlet Code15★Inlet and Outlet Size
DN (mm)DN 20 1500 x DN 25 300		Pressure Limit 1, 2
(kPa)20677		Dimensions 2
"A" x "B" x "C"
(mm ± 1.6)104.8 x 114.3 x 228.6 		Approximate Weight 2
(kg) 6.4
Inlet and Outlet Code16★Inlet and Outlet Size
DN (mm)DN 25 150 x DN 25 150		Pressure Limit 1, 2
(kPa)1965		Dimensions 2
"A" x "B" x "C"
(mm ± 1.6)104.8 x 114.3 x 228.6 		Approximate Weight 2
(kg) 4.1
Inlet and Outlet Code17★Inlet and Outlet Size
DN (mm)DN 25 300 x DN 25 150		Pressure Limit 1, 2
(kPa)5102		Dimensions 2
"A" x "B" x "C"
(mm ± 1.6)104.8 x 114.3 x 228.6 		Approximate Weight 2
(kg) 5.0
Inlet and Outlet Code18★Inlet and Outlet Size
DN (mm)DN 25 600 x DN 25 150		Pressure Limit 1, 2
(kPa)10204		Dimensions 2
"A" x "B" x "C"
(mm ± 1.6)104.8 x 114.3 x 228.6 		Approximate Weight 2
(kg) 5.0
Inlet and Outlet Code19★Inlet and Outlet Size
DN (mm)DN 25 900 x DN 25 300		Pressure Limit 1, 2
(kPa)15306		Dimensions 2
"A" x "B" x "C"
(mm ± 1.6)104.8 x 114.3 x 228.6 		Approximate Weight 2
(kg) 7.3
Inlet and Outlet Code21★Inlet and Outlet Size
DN (mm)DN 25 1500 x DN 25 300		Pressure Limit 1, 2
(kPa)20677		Dimensions 2
"A" x "B" x "C"
(mm ± 1.6)104.8 x 114.3 x 228.6 		Approximate Weight 2
(kg) 7.3
Inlet and Outlet Code22Inlet and Outlet Size
DN (mm)DN 25 150 x DN 40 150		Pressure Limit 1, 2
(kPa)1965		Dimensions 2
"A" x "B" x "C"
(mm ± 1.6)104.8 x 114.3 x 228.6 		Approximate Weight 2
(kg) 5.0
Inlet and Outlet Code23Inlet and Outlet Size
DN (mm)DN 25 300 x DN 40 150		Pressure Limit 1, 2
(kPa)5102		Dimensions 2
"A" x "B" x "C"
(mm ± 1.6)104.8 x 114.3 x 228.6 		Approximate Weight 2
(kg) 5.9
Inlet and Outlet Code24Inlet and Outlet Size
DN (mm)DN 25 600 x DN 40 150		Pressure Limit 1, 2
(kPa)10204		Dimensions 2
"A" x "B" x "C"
(mm ± 1.6)123.8 x 114.3 x 266.7 		Approximate Weight 2
(kg) 5.9
Inlet and Outlet Code25Inlet and Outlet Size
DN (mm)DN 25 900 x DN 40 300		Pressure Limit 1, 2
(kPa)15306		Dimensions 2
"A" x "B" x "C"
(mm ± 1.6)149.2 x 139.7 x 292.1 		Approximate Weight 2
(kg) 12.2
Inlet and Outlet Code26Inlet and Outlet Size
DN (mm)DN 25 1500 x DN 40 300		Pressure Limit 1, 2
(kPa)20677		Dimensions 2
"A" x "B" x "C"
(mm ± 1.6)149.2 x 139.7 x 292.1 		Approximate Weight 2
(kg) 12.2
Inlet and Outlet Code27★☆Inlet and Outlet Size
DN (mm)DN 25 150 x DN 50 150		Pressure Limit 1, 2
(kPa)1965		Dimensions 2
"A" x "B" x "C"
(mm ± 1.6)104.8 x 114.3 x 228.6 		Approximate Weight 2
(kg) 6.4
Inlet and Outlet Code28★☆Inlet and Outlet Size
DN (mm)DN 25 300 x DN 50 150		Pressure Limit 1, 2
(kPa)5102		Dimensions 2
"A" x "B" x "C"
(mm ± 1.6)104.8 x 114.3 x 228.6 		Approximate Weight 2
(kg) 6.8
Inlet and Outlet Code29★☆Inlet and Outlet Size
DN (mm)DN 25 600 x DN 50 150		Pressure Limit 1, 2
(kPa)10204		Dimensions 2
"A" x "B" x "C"
(mm ± 1.6)104.8 x 114.3 x 228.6 		Approximate Weight 2
(kg) 6.8
Inlet and Outlet Code31Inlet and Outlet Size
DN (mm)DN 25 900 x DN 50 300		Pressure Limit 1, 2
(kPa)15306		Dimensions 2
"A" x "B" x "C"
(mm ± 1.6)133.4 x 139.7 x 276.2 		Approximate Weight 2
(kg) 12.7
Inlet and Outlet Code32Inlet and Outlet Size
DN (mm)DN 25 1500 x DN 50 300		Pressure Limit 1, 2
(kPa)20677		Dimensions 2
"A" x "B" x "C"
(mm ± 1.6)133.4 x 139.7 x 276.2 		Approximate Weight 2
(kg) 12.7
Inlet and Outlet Code33Inlet and Outlet Size
DN (mm)DN 40 150 x DN 50 150		Pressure Limit 1, 2
(kPa)1965		Dimensions 2
"A" x "B" x "C"
(mm ± 1.6)133.4 x 139.7 x 276.2 		Approximate Weight 2
(kg) 10.0
Inlet and Outlet Code34Inlet and Outlet Size
DN (mm)DN 40 300 x DN 50 150		Pressure Limit 1, 2
(kPa)5102		Dimensions 2
"A" x "B" x "C"
(mm ± 1.6)123.8 x 152.4 x 266.7 		Approximate Weight 2
(kg) 11.3
Inlet and Outlet Code35Inlet and Outlet Size
DN (mm)DN 40 600 x DN 50 150		Pressure Limit 1, 2
(kPa)10204		Dimensions 2
"A" x "B" x "C"
(mm ± 1.6)123.8 x 152.4 x 266.7 		Approximate Weight 2
(kg) 11.8
Inlet and Outlet Code36★☆Inlet and Outlet Size
DN (mm)DN 40 900 x DN 50 300		Pressure Limit 1, 2
(kPa)15306		Dimensions 2
"A" x "B" x "C"
(mm ± 1.6)149.2 x 152.4 x 292.1 		Approximate Weight 2
(kg) 14.1
Inlet and Outlet Code92★☆Inlet and Outlet Size
DN (mm)DN 40 1500 x DN 50 300		Pressure Limit 1, 2
(kPa)24131		Dimensions 2
"A" x "B" x "C"
(mm ± 1.6)104.8 x 139.7 x 247.7 		Approximate Weight 2
(kg) 14.1
Inlet and Outlet Code42Inlet and Outlet Size
DN (mm)DN 50 150 x DN 50 150		Pressure Limit 1, 2
(kPa)1965		Dimensions 2
"A" x "B" x "C"
(mm ± 1.6)123.8 x 120.7 x 266.7 		Approximate Weight 2
(kg) 10.9
Inlet and Outlet Code43Inlet and Outlet Size
DN (mm)DN 50 300 x DN 50 150		Pressure Limit 1, 2
(kPa)5102		Dimensions 2
"A" x "B" x "C"
(mm ± 1.6)123.8 x 120.7 x 266.7 		Approximate Weight 2
(kg) 11.8
Inlet and Outlet Code44Inlet and Outlet Size
DN (mm)DN 50 600 x DN 50 150		Pressure Limit 1, 2
(kPa)10204		Dimensions 2
"A" x "B" x "C"
(mm ± 1.6)136.5 x 152.4 x 279.4 		Approximate Weight 2
(kg) 13.2
Inlet and Outlet Code45Inlet and Outlet Size
DN (mm)DN 50 900 x DN 50 300		Pressure Limit 1, 2
(kPa)15306		Dimensions 2
"A" x "B" x "C"
(mm ± 1.6)154.0 x 152.4 x 296.9 		Approximate Weight 2
(kg) 20.9
Inlet and Outlet Code95Inlet and Outlet Size
DN (mm)DN 50 1500 x DN 50 300		Pressure Limit 1, 2
(kPa)24131		Dimensions 2
"A" x "B" x "C"
(mm ± 1.6)154.0 x 152.4 x 296.9 		Approximate Weight 2
(kg)

1Pressure limit may be subject to system conditions and temperatures.
2Pressure limit, weight, and “C” dimension may vary with sour gas service and other options.
★Standard Materials or Options.
☆Flange dimensions compliant with API 526.