think…mercer first®
Features:
- Designed with "Auto Seat Technology"®
- A low rated and fully guided spring allows for more consistent Set Pressures from pop to pop.
- Consistent Set Pressures allows for repeatable use without the need for excessive repairs or resetting.
- Open, Close, Seat and Seal™
- Fully guided disk for the proper alignment, opening and closing, and reseating of the valve.
- Mechanical Stop prevents wear on parts and controls valve lift.
- Pop Action relief allows the valve to go to full lift at Set Pressure. This helps with DOT regulated applications.
- Non-rising stems allowing valves to be installed in small areas.
- Sour Service Trim available.
- Additional options available to meet NACE MR0175 requirements.
- Canadian Registration Number (CRN)
- Additional options available to meet Conformité Européenne (CE) to PED Directive 2014/68/EU and/or ATEX Directive 2014/34/EU
| Orifice | D
(USC) | D
(SI) |
|---|---|---|
| OrificeStandard Inlet Sizes | D
(USC)¾", 1", 1 ½", 2" | D
(SI)DN 20, DN 25, DN 40, DN 50 |
| OrificeInlet and Outlet Connection Types | D
(USC)RF x RF, RTJ x RF, RTJ x RTJ | D
(SI)RF x RF, RTJ x RF, RTJ x RTJ |
| OrificeActual Orifice Diameter | D
(USC)0.394 in | D
(SI)10.0 mm |
| OrificeActual Orifice Area | D
(USC)0.122 in2 | D
(SI)78.7 mm2 |
| OrificeAPI Orifice Area | D
(USC)0.110 in2 | D
(SI)71.0 mm2 |
| OrificePressure Range | D
(USC)10 – 3500 psig | D
(SI)69 – 24132 kPag |
| OrificeStandard Temperature Range | D
(USC)-20°F to 400°F | D
(SI)-29°C to 204°C |
| OrificeASME Flow Coefficient, Kd (Gas) | D
(USC)0.818 | D
(SI)0.818 |
| OrificeASME Flow Coefficient, Kd (Liquid) | D
(USC)0.707 | D
(SI)0.707 |
Mercer Valve Co., Inc. reserves the right to change product designs and specifications without notice.
9100 Flanged "D" | Part Number Selection
91 -
17
A
D
B
1
C
1
D
T
E
11
F
U
G
1
H
I
A | INLET & OUTLET COMBINATION
(See Dimensions & Weights, below.)
B | API ORIFICE LETTER
D – 0.122 in²
C | INLET & OUTLET TYPE / BODY MATERIAL
1★ – RF x RF / WCB CARBON STEEL
3★ – RTJ x RF / WCB CARBON STEEL
2 – RF x RF / CF3M STAINLESS STEEL
4 – RTJ x RF / CF3M STAINLESS STEEL
A – RTJ x RTJ / WCB CARBON STEEL
B – RTJ x RTJ / CF3M STAINLESS STEEL
P – RF x RF / LCC TEMP CARBON STEEL
Q – RTJ x RF / LCC TEMP CARBON STEEL
D | CAP TYPE
1★ – CLOSED CAP
2 – OPEN LIFT LEVER
3 – CLOSED LIFT LEVER
E | SEAT MATERIAL
V★ – FKM
T★ – PTFE
P★ – VIRGIN PEEK
B – BUNA-N
E – EPDM
N – NEOPRENE
X – FFKM
Y – VESPEL®
L – PC BUNA
F – FKM (LOW TEMP)
F | SPRING CODE
(Spring codes assigned by Mercer Valve.)
G | TRIM CODES
I★ – 17-4 S.S DISK & NOZZLE (STD GAS SERVICE)
L★ – 316 S.S. DISK & NOZZLE (LIQUID SERVICE)
N★ – 316 S.S. DISK & NOZZLE (SOUR GAS SERVICE)
B★ – 316 S.S. DISK & NOZZLE (SOUR LIQUID SERVICE)
U – 316 S.S. DISK & NOZZLE (OPTIONAL GAS SERVICE)
C – 440C S.S. DISK, 17-4 S.S. NOZZLE (OPTIONAL GAS SERVICE)
X – ALL 316 S.S. (OPTIONAL GAS SERVICE)
LX – ALL 316 S.S. (OPTIONAL LIQUID SERVICE)
BX – ALL 316 S.S. (OPTIONAL SOUR LIQUID SERVICE)
NX – ALL 316 S.S. (OPTIONAL SOUR GAS SERVICE)
H | O-RING MATERIAL
1★ – (FKM & BUNA-N)
2 – FKM 75 DURO
3 – FKM 90 DURO
4 – BUNA-N 70 DURO
5 – BUNA-N (LOW TEMP) 75 DURO
6 – FFKM 75 DURO
7 – FFKM 90 DURO
9 – NEOPRENE 70 DURO
A – CHEMRAZ® 505
C – EPDM 80 DURO
D – EPDM 90 DURO
F – PTFE
G – TFE/P 80
H – SILICONE 70 DURO
J – FLUOROSILICONE 70 DURO
K – HNBR
L – PC BUNA
M – FKM ED
P – FKM (LOW TEMP) 75 DURO
I | TWO-DIGIT "SPECIAL" CODE
(Two-digit special codes assigned by Mercer Valve, if applicable.)
★Standard Materials or Options.
| Inlet and Outlet Code | Inlet and Outlet Size (in) | Pressure Limit 1, 2 (psig) | Dimensions 2
"A" x "B" x "C" (in ± .062) | Approximate Weight 2 (lbs) |
|---|---|---|---|---|
| Inlet and Outlet Code05 | Inlet and Outlet Size (in)½" 150 x 1" 150 | Pressure Limit 1, 2 (psig)285 | Dimensions 2
"A" x "B" x "C" (in ± .062)3.375 x 4.500 x 8.188 | Approximate Weight 2 (lbs) |
| Inlet and Outlet Code06 | Inlet and Outlet Size (in)½" 300 x 1" 150 | Pressure Limit 1, 2 (psig)740 | Dimensions 2
"A" x "B" x "C" (in ± .062)3.375 x 4.500 x 8.188 | Approximate Weight 2 (lbs) |
| Inlet and Outlet Code07 | Inlet and Outlet Size (in)½" 600 x 1" 150 | Pressure Limit 1, 2 (psig)1480 | Dimensions 2
"A" x "B" x "C" (in ± .062)3.375 x 4.500 x 8.188 | Approximate Weight 2 (lbs) |
| Inlet and Outlet Code08 | Inlet and Outlet Size (in)½" 900 x 1" 300 | Pressure Limit 1, 2 (psig)2220 | Dimensions 2
"A" x "B" x "C" (in ± .062)3.750 x 4.500 x 8.563 | Approximate Weight 2 (lbs) |
| Inlet and Outlet Code09 | Inlet and Outlet Size (in)½" 1500 x 1" 300 | Pressure Limit 1, 2 (psig)2999 | Dimensions 2
"A" x "B" x "C" (in ± .062)3.750 x 4.500 x 8.563 | Approximate Weight 2 (lbs) |
| Inlet and Outlet Code11★ | Inlet and Outlet Size (in)¾" 150 x 1" 150 | Pressure Limit 1, 2 (psig)285 | Dimensions 2
"A" x "B" x "C" (in ± .062)4.125 x 4.500 x 8.938 | Approximate Weight 2 (lbs) 9 |
| Inlet and Outlet Code12★ | Inlet and Outlet Size (in)¾" 300 x 1" 150 | Pressure Limit 1, 2 (psig)740 | Dimensions 2
"A" x "B" x "C" (in ± .062)4.125 x 4.500 x 8.938 | Approximate Weight 2 (lbs) 10 |
| Inlet and Outlet Code13★ | Inlet and Outlet Size (in)¾" 600 x 1" 150 | Pressure Limit 1, 2 (psig)1480 | Dimensions 2
"A" x "B" x "C" (in ± .062)4.125 x 4.500 x 8.938 | Approximate Weight 2 (lbs) 11 |
| Inlet and Outlet Code14★ | Inlet and Outlet Size (in)¾" 900 x 1" 300 | Pressure Limit 1, 2 (psig)2220 | Dimensions 2
"A" x "B" x "C" (in ± .062)4.125 x 4.500 x 8.938 | Approximate Weight 2 (lbs) 14 |
| Inlet and Outlet Code15★ | Inlet and Outlet Size (in)¾" 1500 x 1" 300 | Pressure Limit 1, 2 (psig)2999 | Dimensions 2
"A" x "B" x "C" (in ± .062)4.125 x 4.500 x 8.938 | Approximate Weight 2 (lbs) 14 |
| Inlet and Outlet Code16★ | Inlet and Outlet Size (in)1" 150 x 1" 150 | Pressure Limit 1, 2 (psig)285 | Dimensions 2
"A" x "B" x "C" (in ± .062)4.125 x 4.500 x 8.938 | Approximate Weight 2 (lbs) 12 |
| Inlet and Outlet Code17★ | Inlet and Outlet Size (in)1" 300 x 1" 150 | Pressure Limit 1, 2 (psig)740 | Dimensions 2
"A" x "B" x "C" (in ± .062)4.125 x 4.500 x 8.938 | Approximate Weight 2 (lbs) 13 |
| Inlet and Outlet Code18★ | Inlet and Outlet Size (in)1" 600 x 1" 150 | Pressure Limit 1, 2 (psig)1480 | Dimensions 2
"A" x "B" x "C" (in ± .062)4.125 x 4.500 x 8.938 | Approximate Weight 2 (lbs) 14 |
| Inlet and Outlet Code19★ | Inlet and Outlet Size (in)1" 900 x 1" 300 | Pressure Limit 1, 2 (psig)2220 | Dimensions 2
"A" x "B" x "C" (in ± .062)4.125 x 4.500 x 8.938 | Approximate Weight 2 (lbs) 18 |
| Inlet and Outlet Code21★ | Inlet and Outlet Size (in)1" 1500 x 1" 300 | Pressure Limit 1, 2 (psig)2999 | Dimensions 2
"A" x "B" x "C" (in ± .062)4.125 x 4.500 x 8.938 | Approximate Weight 2 (lbs) 18 |
| Inlet and Outlet Code22 | Inlet and Outlet Size (in)1" 150 x 1 ½" 150 | Pressure Limit 1, 2 (psig)285 | Dimensions 2
"A" x "B" x "C" (in ± .062)4.125 x 4.500 x 8.938 | Approximate Weight 2 (lbs) 13 |
| Inlet and Outlet Code23 | Inlet and Outlet Size (in)1" 300 x 1 ½" 150 | Pressure Limit 1, 2 (psig)740 | Dimensions 2
"A" x "B" x "C" (in ± .062)4.125 x 4.500 x 8.938 | Approximate Weight 2 (lbs) 14 |
| Inlet and Outlet Code24 | Inlet and Outlet Size (in)1" 600 x 1 ½" 150 | Pressure Limit 1, 2 (psig)1480 | Dimensions 2
"A" x "B" x "C" (in ± .062)4.875 x 4.500 x 10.500 | Approximate Weight 2 (lbs) 15 |
| Inlet and Outlet Code25 | Inlet and Outlet Size (in)1" 900 x 1 ½" 300 | Pressure Limit 1, 2 (psig)2220 | Dimensions 2
"A" x "B" x "C" (in ± .062)5.250 x 5.500 x 10.875 | Approximate Weight 2 (lbs) 19 |
| Inlet and Outlet Code26 | Inlet and Outlet Size (in)1" 1500 x 1 ½" 300 | Pressure Limit 1, 2 (psig)2999 | Dimensions 2
"A" x "B" x "C" (in ± .062)5.250 x 5.500 x 10.875 | Approximate Weight 2 (lbs) 19 |
| Inlet and Outlet Code27★☆ | Inlet and Outlet Size (in)1" 150 x 2" 150 | Pressure Limit 1, 2 (psig)285 | Dimensions 2
"A" x "B" x "C" (in ± .062)4.125 x 4.500 x 8.938 | Approximate Weight 2 (lbs) 14 |
| Inlet and Outlet Code28★☆ | Inlet and Outlet Size (in)1" 300 x 2" 150 | Pressure Limit 1, 2 (psig)740 | Dimensions 2
"A" x "B" x "C" (in ± .062)4.125 x 4.500 x 8.938 | Approximate Weight 2 (lbs) 15 |
| Inlet and Outlet Code29★☆ | Inlet and Outlet Size (in)1" 600 x 2" 150 | Pressure Limit 1, 2 (psig)1480 | Dimensions 2
"A" x "B" x "C" (in ± .062)4.125 x 4.500 x 8.938 | Approximate Weight 2 (lbs) 16 |
| Inlet and Outlet Code31 | Inlet and Outlet Size (in)1" 900 x 2" 300 | Pressure Limit 1, 2 (psig)2220 | Dimensions 2
"A" x "B" x "C" (in ± .062)5.250 x 5.500 x 10.875 | Approximate Weight 2 (lbs) 24 |
| Inlet and Outlet Code32 | Inlet and Outlet Size (in)1" 1500 x 2" 300 | Pressure Limit 1, 2 (psig)2999 | Dimensions 2
"A" x "B" x "C" (in ± .062)5.250 x 5.500 x 10.875 | Approximate Weight 2 (lbs) 24 |
| Inlet and Outlet Code33 | Inlet and Outlet Size (in)1 ½" 150 x 2" 150 | Pressure Limit 1, 2 (psig)285 | Dimensions 2
"A" x "B" x "C" (in ± .062)4.875 x 4.750 x 10.500 | Approximate Weight 2 (lbs) 22 |
| Inlet and Outlet Code34 | Inlet and Outlet Size (in)1 ½" 300 x 2" 150 | Pressure Limit 1, 2 (psig)740 | Dimensions 2
"A" x "B" x "C" (in ± .062)4.875 x 6.000 x 10.500 | Approximate Weight 2 (lbs) 25 |
| Inlet and Outlet Code35 | Inlet and Outlet Size (in)1 ½" 600 x 2" 150 | Pressure Limit 1, 2 (psig)1480 | Dimensions 2
"A" x "B" x "C" (in ± .062)4.875 x 6.000 x 10.500 | Approximate Weight 2 (lbs) 26 |
| Inlet and Outlet Code36★☆ | Inlet and Outlet Size (in)1 ½" 900 x 2" 300 | Pressure Limit 1, 2 (psig)2220 | Dimensions 2
"A" x "B" x "C" (in ± .062)4.125 x 5.500 x 9.748 | Approximate Weight 2 (lbs) 31 |
| Inlet and Outlet Code92★☆ | Inlet and Outlet Size (in)1 ½" 1500 x 2" 300 | Pressure Limit 1, 2 (psig)3500 | Dimensions 2
"A" x "B" x "C" (in ± .062)4.125 x 5.500 x 9.748 | Approximate Weight 2 (lbs) 31 |
| Inlet and Outlet Code42 | Inlet and Outlet Size (in)2" 150 x 2" 150 | Pressure Limit 1, 2 (psig)285 | Dimensions 2
"A" x "B" x "C" (in ± .062)4.875 x 4.750 x 10.500 | Approximate Weight 2 (lbs) 24 |
| Inlet and Outlet Code43 | Inlet and Outlet Size (in)2" 300 x 2" 150 | Pressure Limit 1, 2 (psig)740 | Dimensions 2
"A" x "B" x "C" (in ± .062)4.875 x 4.750 x 10.500 | Approximate Weight 2 (lbs) 26 |
| Inlet and Outlet Code44 | Inlet and Outlet Size (in)2" 600 x 2" 150 | Pressure Limit 1, 2 (psig)1480 | Dimensions 2
"A" x "B" x "C" (in ± .062)5.375 x 6.000 x 11.000 | Approximate Weight 2 (lbs) 29 |
| Inlet and Outlet Code45 | Inlet and Outlet Size (in)2" 900 x 2" 300 | Pressure Limit 1, 2 (psig)2220 | Dimensions 2
"A" x "B" x "C" (in ± .062)6.063 x 6.000 x 11.688 | Approximate Weight 2 (lbs) 46 |
| Inlet and Outlet Code95 | Inlet and Outlet Size (in)2" 1500 x 2" 300 | Pressure Limit 1, 2 (psig)3500 | Dimensions 2
"A" x "B" x "C" (in ± .062)6.063 x 6.000 x 11.688 | Approximate Weight 2 (lbs) |
1Pressure limit may be subject to system conditions and temperatures.
2Pressure limit, weight, and “C” dimension may vary with sour gas service and other options.
★Standard Materials or Options.
☆Flange dimensions compliant with API 526.
| Inlet and Outlet Code | Inlet and Outlet Size DN (mm) | Pressure Limit 1, 2 (kPag) | Dimensions 2
"A" x "B" x "C" (mm ± 1.6) | Approximate Weight 2 (kg) |
|---|---|---|---|---|
| Inlet and Outlet Code05 | Inlet and Outlet Size DN (mm)DN 15 150 x DN 25 150 | Pressure Limit 1, 2 (kPag)1965 | Dimensions 2
"A" x "B" x "C" (mm ± 1.6)85.7 x 114.3 x 208.0 | Approximate Weight 2 (kg) |
| Inlet and Outlet Code06 | Inlet and Outlet Size DN (mm)DN 15 300 x DN 25 150 | Pressure Limit 1, 2 (kPag)5102 | Dimensions 2
"A" x "B" x "C" (mm ± 1.6)85.7 x 114.3 x 208.0 | Approximate Weight 2 (kg) |
| Inlet and Outlet Code07 | Inlet and Outlet Size DN (mm)DN 15 600 x DN 25 150 | Pressure Limit 1, 2 (kPag)10204 | Dimensions 2
"A" x "B" x "C" (mm ± 1.6)85.7 x 114.3 x 208.0 | Approximate Weight 2 (kg) |
| Inlet and Outlet Code08 | Inlet and Outlet Size DN (mm)DN 15 900 x DN 25 300 | Pressure Limit 1, 2 (kPag)15306 | Dimensions 2
"A" x "B" x "C" (mm ± 1.6)95.3 x 114.3 x 217.5 | Approximate Weight 2 (kg) |
| Inlet and Outlet Code09 | Inlet and Outlet Size DN (mm)DN 15 1500 x DN 25 300 | Pressure Limit 1, 2 (kPag)20677 | Dimensions 2
"A" x "B" x "C" (mm ± 1.6)95.3 x 114.3 x 217.5 | Approximate Weight 2 (kg) |
| Inlet and Outlet Code11★ | Inlet and Outlet Size DN (mm)DN 20 150 x DN 25 150 | Pressure Limit 1, 2 (kPag)1965 | Dimensions 2
"A" x "B" x "C" (mm ± 1.6)104.8 x 114.3 x 228.6 | Approximate Weight 2 (kg) 4.1 |
| Inlet and Outlet Code12★ | Inlet and Outlet Size DN (mm)DN 20 300 x DN 25 150 | Pressure Limit 1, 2 (kPag)5102 | Dimensions 2
"A" x "B" x "C" (mm ± 1.6)104.8 x 114.3 x 228.6 | Approximate Weight 2 (kg) 4.5 |
| Inlet and Outlet Code13★ | Inlet and Outlet Size DN (mm)DN 20 600 x DN 25 150 | Pressure Limit 1, 2 (kPag)10204 | Dimensions 2
"A" x "B" x "C" (mm ± 1.6)104.8 x 114.3 x 228.6 | Approximate Weight 2 (kg) 5.0 |
| Inlet and Outlet Code14★ | Inlet and Outlet Size DN (mm)DN 20 900 x DN 25 300 | Pressure Limit 1, 2 (kPag)15306 | Dimensions 2
"A" x "B" x "C" (mm ± 1.6)104.8 x 114.3 x 228.6 | Approximate Weight 2 (kg) 6.4 |
| Inlet and Outlet Code15★ | Inlet and Outlet Size DN (mm)DN 20 1500 x DN 25 300 | Pressure Limit 1, 2 (kPag)20677 | Dimensions 2
"A" x "B" x "C" (mm ± 1.6)104.8 x 114.3 x 228.6 | Approximate Weight 2 (kg) 6.4 |
| Inlet and Outlet Code16★ | Inlet and Outlet Size DN (mm)DN 25 150 x DN 25 150 | Pressure Limit 1, 2 (kPag)1965 | Dimensions 2
"A" x "B" x "C" (mm ± 1.6)104.8 x 114.3 x 228.6 | Approximate Weight 2 (kg) 4.1 |
| Inlet and Outlet Code17★ | Inlet and Outlet Size DN (mm)DN 25 300 x DN 25 150 | Pressure Limit 1, 2 (kPag)5102 | Dimensions 2
"A" x "B" x "C" (mm ± 1.6)104.8 x 114.3 x 228.6 | Approximate Weight 2 (kg) 5.0 |
| Inlet and Outlet Code18★ | Inlet and Outlet Size DN (mm)DN 25 600 x DN 25 150 | Pressure Limit 1, 2 (kPag)10204 | Dimensions 2
"A" x "B" x "C" (mm ± 1.6)104.8 x 114.3 x 228.6 | Approximate Weight 2 (kg) 5.0 |
| Inlet and Outlet Code19★ | Inlet and Outlet Size DN (mm)DN 25 900 x DN 25 300 | Pressure Limit 1, 2 (kPag)15306 | Dimensions 2
"A" x "B" x "C" (mm ± 1.6)104.8 x 114.3 x 228.6 | Approximate Weight 2 (kg) 7.3 |
| Inlet and Outlet Code21★ | Inlet and Outlet Size DN (mm)DN 25 1500 x DN 25 300 | Pressure Limit 1, 2 (kPag)20677 | Dimensions 2
"A" x "B" x "C" (mm ± 1.6)104.8 x 114.3 x 228.6 | Approximate Weight 2 (kg) 7.3 |
| Inlet and Outlet Code22 | Inlet and Outlet Size DN (mm)DN 25 150 x DN 40 150 | Pressure Limit 1, 2 (kPag)1965 | Dimensions 2
"A" x "B" x "C" (mm ± 1.6)104.8 x 114.3 x 228.6 | Approximate Weight 2 (kg) 5.0 |
| Inlet and Outlet Code23 | Inlet and Outlet Size DN (mm)DN 25 300 x DN 40 150 | Pressure Limit 1, 2 (kPag)5102 | Dimensions 2
"A" x "B" x "C" (mm ± 1.6)104.8 x 114.3 x 228.6 | Approximate Weight 2 (kg) 5.9 |
| Inlet and Outlet Code24 | Inlet and Outlet Size DN (mm)DN 25 600 x DN 40 150 | Pressure Limit 1, 2 (kPag)10204 | Dimensions 2
"A" x "B" x "C" (mm ± 1.6)123.8 x 114.3 x 266.7 | Approximate Weight 2 (kg) 5.9 |
| Inlet and Outlet Code25 | Inlet and Outlet Size DN (mm)DN 25 900 x DN 40 300 | Pressure Limit 1, 2 (kPag)15306 | Dimensions 2
"A" x "B" x "C" (mm ± 1.6)149.2 x 139.7 x 292.1 | Approximate Weight 2 (kg) 12.2 |
| Inlet and Outlet Code26 | Inlet and Outlet Size DN (mm)DN 25 1500 x DN 40 300 | Pressure Limit 1, 2 (kPag)20677 | Dimensions 2
"A" x "B" x "C" (mm ± 1.6)149.2 x 139.7 x 292.1 | Approximate Weight 2 (kg) 12.2 |
| Inlet and Outlet Code27★☆ | Inlet and Outlet Size DN (mm)DN 25 150 x DN 50 150 | Pressure Limit 1, 2 (kPag)1965 | Dimensions 2
"A" x "B" x "C" (mm ± 1.6)104.8 x 114.3 x 228.6 | Approximate Weight 2 (kg) 6.4 |
| Inlet and Outlet Code28★☆ | Inlet and Outlet Size DN (mm)DN 25 300 x DN 50 150 | Pressure Limit 1, 2 (kPag)5102 | Dimensions 2
"A" x "B" x "C" (mm ± 1.6)104.8 x 114.3 x 228.6 | Approximate Weight 2 (kg) 6.8 |
| Inlet and Outlet Code29★☆ | Inlet and Outlet Size DN (mm)DN 25 600 x DN 50 150 | Pressure Limit 1, 2 (kPag)10204 | Dimensions 2
"A" x "B" x "C" (mm ± 1.6)104.8 x 114.3 x 228.6 | Approximate Weight 2 (kg) 6.8 |
| Inlet and Outlet Code31 | Inlet and Outlet Size DN (mm)DN 25 900 x DN 50 300 | Pressure Limit 1, 2 (kPag)15306 | Dimensions 2
"A" x "B" x "C" (mm ± 1.6)133.4 x 139.7 x 276.2 | Approximate Weight 2 (kg) 12.7 |
| Inlet and Outlet Code32 | Inlet and Outlet Size DN (mm)DN 25 1500 x DN 50 300 | Pressure Limit 1, 2 (kPag)20677 | Dimensions 2
"A" x "B" x "C" (mm ± 1.6)133.4 x 139.7 x 276.2 | Approximate Weight 2 (kg) 12.7 |
| Inlet and Outlet Code33 | Inlet and Outlet Size DN (mm)DN 40 150 x DN 50 150 | Pressure Limit 1, 2 (kPag)1965 | Dimensions 2
"A" x "B" x "C" (mm ± 1.6)133.4 x 139.7 x 276.2 | Approximate Weight 2 (kg) 10.0 |
| Inlet and Outlet Code34 | Inlet and Outlet Size DN (mm)DN 40 300 x DN 50 150 | Pressure Limit 1, 2 (kPag)5102 | Dimensions 2
"A" x "B" x "C" (mm ± 1.6)123.8 x 152.4 x 266.7 | Approximate Weight 2 (kg) 11.3 |
| Inlet and Outlet Code35 | Inlet and Outlet Size DN (mm)DN 40 600 x DN 50 150 | Pressure Limit 1, 2 (kPag)10204 | Dimensions 2
"A" x "B" x "C" (mm ± 1.6)123.8 x 152.4 x 266.7 | Approximate Weight 2 (kg) 11.8 |
| Inlet and Outlet Code36★☆ | Inlet and Outlet Size DN (mm)DN 40 900 x DN 50 300 | Pressure Limit 1, 2 (kPag)15306 | Dimensions 2
"A" x "B" x "C" (mm ± 1.6)149.2 x 152.4 x 292.1 | Approximate Weight 2 (kg) 14.1 |
| Inlet and Outlet Code92★☆ | Inlet and Outlet Size DN (mm)DN 40 1500 x DN 50 300 | Pressure Limit 1, 2 (kPag)24132 | Dimensions 2
"A" x "B" x "C" (mm ± 1.6)104.8 x 139.7 x 247.7 | Approximate Weight 2 (kg) 14.1 |
| Inlet and Outlet Code42 | Inlet and Outlet Size DN (mm)DN 50 150 x DN 50 150 | Pressure Limit 1, 2 (kPag)1965 | Dimensions 2
"A" x "B" x "C" (mm ± 1.6)123.8 x 120.7 x 266.7 | Approximate Weight 2 (kg) 10.9 |
| Inlet and Outlet Code43 | Inlet and Outlet Size DN (mm)DN 50 300 x DN 50 150 | Pressure Limit 1, 2 (kPag)5102 | Dimensions 2
"A" x "B" x "C" (mm ± 1.6)123.8 x 120.7 x 266.7 | Approximate Weight 2 (kg) 11.8 |
| Inlet and Outlet Code44 | Inlet and Outlet Size DN (mm)DN 50 600 x DN 50 150 | Pressure Limit 1, 2 (kPag)10204 | Dimensions 2
"A" x "B" x "C" (mm ± 1.6)136.5 x 152.4 x 279.4 | Approximate Weight 2 (kg) 13.2 |
| Inlet and Outlet Code45 | Inlet and Outlet Size DN (mm)DN 50 900 x DN 50 300 | Pressure Limit 1, 2 (kPag)15306 | Dimensions 2
"A" x "B" x "C" (mm ± 1.6)154.0 x 152.4 x 296.9 | Approximate Weight 2 (kg) 20.9 |
| Inlet and Outlet Code95 | Inlet and Outlet Size DN (mm)DN 50 1500 x DN 50 300 | Pressure Limit 1, 2 (kPag)24132 | Dimensions 2
"A" x "B" x "C" (mm ± 1.6)154.0 x 152.4 x 296.9 | Approximate Weight 2 (kg) |
1Pressure limit may be subject to system conditions and temperatures.
2Pressure limit, weight, and “C” dimension may vary with sour gas service and other options.
★Standard Materials or Options.
☆Flange dimensions compliant with API 526.