Please ensure Javascript is enabled for purposes of website accessibility
9609 NW 4TH ST. OKLAHOMA CITY, OK 73127
(800) 833-6402 Contact Us

9500 Snap Pilot “F” Orifice

Back to Products

think…mercer first®

9500 Snap Pilot “F” Orifice
9500 Snap F - Cutaway - Outline NEW
9500 Snap Pilot “F” Orifice
9500 Snap F - Cutaway - Outline NEW

Features:

  • Designed with "Auto Seat Technology"®
  • A low rated and fully guided spring allows for more consistent Set Pressures from pop to pop.
  • Consistent Set Pressures allows for repeatable use without the need for excessive repairs or resetting.
  • Open, Close, Seat and Seal™
  • Non-rising stems allowing valves to be installed in small areas.
  • Pilot Valve options include: Backflow Preventer, Pressure Snubber and Auxiliary Filter.
  • Snap Pilot Valve options include: Field Test Connection, Test Gag, and Manual or Remote Blowdown.
  • Sour Service Trim available.
  • Additional options available to meet NACE MR0175 requirements.
  • Canadian Registration Number (CRN)
  • Additional options available to meet Conformité Européenne (CE) to PED Directive 2014/68/EU and/or ATEX Directive 2014/34/EU
Valve Shipping Flyers Repair Kit Flyers IOM Manuals Main Valve Selection Pilot Valve Selection Dimensions
9500 Snap Pilot "F" Orifice | Model Specifications
OrificeF
(USC) 		F
(SI)
OrificeStandard Inlet SizesF
(USC) 1", 1 ½"		F
(SI) DN 25, DN 40
OrificeInlet and Outlet Connection TypesF
(USC) RF x RF,
RTJ x RF,
RTJ x RTJ		F
(SI) RF x RF,
RTJ x RF,
RTJ x RTJ
OrificeActual Orifice DiameterF
(USC) 0.687 in		F
(SI) 17.4 mm
OrificeActual Orifice AreaF
(USC) 0.371 in2		F
(SI) 239.4 mm2
OrificeAPI Orifice AreaF
(USC) 0.307 in2		F
(SI) 198.1 mm2
OrificePressure RangeF
(USC) 15 – 4500 psig		F
(SI) 104 – 31026 kPa
OrificeStandard Temperature RangeF
(USC) -20°F to 400°F		F
(SI) -29°C to 204°C
OrificeASME Flow Coefficient, Kd (Gas)F
(USC) 0.870		F
(SI) 0.870

Mercer Valve Co., Inc. reserves the right to change product designs and specifications without notice.

9500 Snap Main Valve "F" Orifice | Part Number Selection

95 -
27
A
F
B
1
C
3
D
2
E
8
F
 
G
S
H
 
I
 
J

A | INLET & OUTLET COMBINATION

(See Dimensions & Weights, below.)

B | API ORIFICE SIZE

F – 0.371 in²

C | FLANGE TYPE

1★ – RF x RF
2 – RTJ x RTJ
3 – RTJ x RF

D | BODY MATERIAL

3★ – WCB CARBON STEEL
4 – CF3M STAINLESS STEEL
5 – LCC CARBON STEEL

E | OPTIONS

0★ – NO OPTIONS
1 – BACKFLOW PREVENTER
2 – PRESSURE SNUBBER
3 – AUXILIARY FILTER
4 – OPTIONS 1 & 2
5 – OPTIONS 1 & 3
6 – OPTIONS 2 & 3
7 – OPTIONS 1, 2, & 3

F | SEAT MATERIAL┼┼

7★ – PTFE
8★ - FKM
9★ – PEEK
N – NEOPRENE
B – BUNA
E – EPDM
Y – VESPEL®
X – FFKM

G | SOUR GAS SERVICE

BLANK★ - NON SOUR APPLICATIONS
N – SOUR GAS SERVICE

H | PILOT TYPE

S★ – SNAP PILOT (See below for part numbering breakdown.)

I | O-RING MATERIAL┼┼

BLANK★ – STANDARD IF APPLICABLE
3 – PC BUNA
5 – LOW TEMP BUNA
6 – FFKM
7 – FKM ED
9 – NEOPRENE
C – EPDM
K – HNBR

J | TWO-DIGIT "SPECIAL" CODE

(Two-digit special codes assigned by Mercer Valve, if applicable.)

★Standard Materials or Options.
┼┼O-ring codes are only used with Seat codes 7, 9, & Y when O-rings are not standard FKM. If using the standard FKM O-rings, leave O-ring code BLANK.

9500 Snap Pilot Valve | Part Number Selection

G -
1
A
1
B
0
F
0
D
0
E
07
F
 
G
 
H
 
I

A | BODY / BONNET MATERIAL

1★ – CF3M STAINLESS STEEL / CARBON STEEL
2 – CF3M STAINLESS STEEL / 316 STAINLESS STEEL

B | UPPER SEAT / LOWER SEAT▽

1★ – FKM / FKM
A★ – FKM / PTFE
V★ – FKM / VESPEL
5 - BUNA / BUNA
6 - EPDM / EPDM
7 - NEOPRENE / NEOPRENE
8 - PC BUNA / PC BUNA
9 - FFKM / FFKM
H - HNBR / PTFE
D - BUNA / PTFE
E - EPDM / PTFE
C - PC BUNA / PTFE
K - FFKM / PTFE
J – HNBR / VESPEL
B – BUNA / VESPEL
G – EPDM / VESPEL
T – PC BUNA / VESPEL
X – FFKM / VESPEL

C | BLOWDOWN TYPE

0★ – NONE
1 - MANUAL BLOWDOWN VALVE╋
2 - REMOTE BLOWDOWN VALVE╋
3 - LIFT LEVER

D | FIELD TEST CONNECTION

0★ – NONE
1 - STANDARD

E | TEST ACCESSORIES

0★ – NONE
1 - TEST GAG

F | SPRING CODE

(Spring codes assigned by Mercer Valve.)

G | SOUR GAS SERVICE

BLANK★ – NON SOUR APPLICATIONS
N – SOUR GAS SERVICE

H | ORING MATERIAL▽

BLANK★ – STANDARD IF APPLICABLE
7 – FKM ED

I | TWO-DIGIT "SPECIAL" CODE

(Two-digit special codes assigned by Mercer Valve, if applicable.)

★Standard Materials or Options.
▽Seat and O-Ring Material codes must match when available. Consult Factory.
╋May require a Special Code on the Main Valve. Consult Factory.

9500 Snap Pilot "F" Orifice | Dimensions & Weights (USC)
Inlet and Outlet CodeInlet and Outlet Size
(in) 		Pressure Limit 1, 2
(psig)		Dimensions 2
"A" x "B" x "C"
(in ± .062) 		Approximate Weight 2
(lbs)
Inlet and Outlet Code27☆Inlet and Outlet Size
(in) 1" 150 x 2" 150		Pressure Limit 1, 2
(psig)285		Dimensions 2
"A" x "B" x "C"
(in ± .062) 4.125 x 4.500 x 12.684		Approximate Weight 2
(lbs) 32
Inlet and Outlet Code28☆Inlet and Outlet Size
(in) 1" 300 x 2" 150		Pressure Limit 1, 2
(psig)740		Dimensions 2
"A" x "B" x "C"
(in ± .062) 4.375 x 4.500 x 12.934		Approximate Weight 2
(lbs) 33
Inlet and Outlet Code29☆Inlet and Outlet Size
(in) 1" 600 x 2" 150		Pressure Limit 1, 2
(psig)1480		Dimensions 2
"A" x "B" x "C"
(in ± .062) 4.375 x 4.500 x 12.934		Approximate Weight 2
(lbs) 34
Inlet and Outlet Code31☆Inlet and Outlet Size
(in) 1" 900 x 2" 300		Pressure Limit 1, 2
(psig)2220		Dimensions 2
"A" x "B" x "C"
(in ± .062) 4.937 x 4.750 x 12.496		Approximate Weight 2
(lbs) 41
Inlet and Outlet Code32☆Inlet and Outlet Size
(in) 1" 1500 x 2" 300		Pressure Limit 1, 2
(psig)3705		Dimensions 2
"A" x "B" x "C"
(in ± .062) 4.937 x 4.750 x 13.496		Approximate Weight 2
(lbs) 41
Inlet and Outlet Code32.2☆Inlet and Outlet Size
(in) 1" 2500 x 2" 300		Pressure Limit 1, 2
(psig)4500		Dimensions 2
"A" x "B" x "C"
(in ± .062) 4.937 x 4.750 x 13.496		Approximate Weight 2
(lbs) 44
Inlet and Outlet Code33☆Inlet and Outlet Size
(in) 1 ½” 150 x 2” 150		Pressure Limit 1, 2
(psig)285		Dimensions 2
"A" x "B" x "C"
(in ± .062) 4.875 x 4.750 x 13.434		Approximate Weight 2
(lbs) 36
Inlet and Outlet Code34☆Inlet and Outlet Size
(in) 1 ½" 300 x 2" 150		Pressure Limit 1, 2
(psig)740		Dimensions 2
"A" x "B" x "C"
(in ± .062) 4.875 x 4.750 x 13.434		Approximate Weight 2
(lbs) 39
Inlet and Outlet Code35☆Inlet and Outlet Size
(in) 1 ½" 600 x 2" 150		Pressure Limit 1, 2
(psig)1480		Dimensions 2
"A" x "B" x "C"
(in ± .062) 4.875 x 4.750 x 13.434		Approximate Weight 2
(lbs) 39
Inlet and Outlet Code36☆Inlet and Outlet Size
(in) 1 ½" 900 x 2" 300		Pressure Limit 1, 2
(psig)2220		Dimensions 2
"A" x "B" x "C"
(in ± .062) 5.875 x 5.500 x 14.433		Approximate Weight 2
(lbs) 47
Inlet and Outlet Code36.1☆Inlet and Outlet Size
(in) 1 ½" 1500 x 2" 300		Pressure Limit 1, 2
(psig)3705		Dimensions 2
"A" x "B" x "C"
(in ± .062) 5.875 x 5.500 x 14.433		Approximate Weight 2
(lbs) 47
Inlet and Outlet Code36.2☆Inlet and Outlet Size
(in) 1 ½" 2500 x 2" 300		Pressure Limit 1, 2
(psig)4500		Dimensions 2
"A" x "B" x "C"
(in ± .062) 5.875 x 5.500 x 14.433		Approximate Weight 2
(lbs) 58

1Pressure limit may be subject to system conditions and temperatures.
2Pressure limit, weight, and “C” dimension may vary with sour gas service and other options.
☆Flange dimensions compliant with API 526.

9500 Snap Pilot "F" Orifice | Dimensions & Weights (SI)
Inlet and Outlet CodeInlet and Outlet Size
(mm) 		Pressure Limit 1, 2
(kPa)		Dimensions 2
"A" x "B" x "C"
(mm ± 1.6)		Approximate Weight 2
(kg)
Inlet and Outlet Code27☆Inlet and Outlet Size
(mm) DN 25 150 x DN 50 150		Pressure Limit 1, 2
(kPa)1965		Dimensions 2
"A" x "B" x "C"
(mm ± 1.6)104.8 x 114.3 x 296.9		Approximate Weight 2
(kg)14.5
Inlet and Outlet Code28☆Inlet and Outlet Size
(mm) DN 25 300 x DN 50 150		Pressure Limit 1, 2
(kPa)5102		Dimensions 2
"A" x "B" x "C"
(mm ± 1.6)111.1 x 114.3 x 328.4		Approximate Weight 2
(kg)15.0
Inlet and Outlet Code29☆Inlet and Outlet Size
(mm) DN 25 600 x DN 50 150		Pressure Limit 1, 2
(kPa)10204		Dimensions 2
"A" x "B" x "C"
(mm ± 1.6)111.1 x 114.3 x 328.4		Approximate Weight 2
(kg)15.4
Inlet and Outlet Code31☆Inlet and Outlet Size
(mm) DN 25 900 x DN 50 300		Pressure Limit 1, 2
(kPa)15306		Dimensions 2
"A" x "B" x "C"
(mm ± 1.6)125.4 x 120.7 x 342.9		Approximate Weight 2
(kg)18.6
Inlet and Outlet Code32☆Inlet and Outlet Size
(mm) DN 25 1500 x DN 50 300		Pressure Limit 1, 2
(kPa)25545		Dimensions 2
"A" x "B" x "C"
(mm ± 1.6)125.4 x 120.7 x 342.9		Approximate Weight 2
(kg)18.6
Inlet and Outlet Code32.2☆Inlet and Outlet Size
(mm) DN 25 2500 x DN 50 300		Pressure Limit 1, 2
(kPa)31026		Dimensions 2
"A" x "B" x "C"
(mm ± 1.6)125.4 x 120.7 x 342.9		Approximate Weight 2
(kg)20.0
Inlet and Outlet Code33☆Inlet and Outlet Size
(mm) DN 40 150 x DN 50 150		Pressure Limit 1, 2
(kPa)1965		Dimensions 2
"A" x "B" x "C"
(mm ± 1.6)123.8 x 120.7 x 341.1		Approximate Weight 2
(kg)16.3
Inlet and Outlet Code34☆Inlet and Outlet Size
(mm) DN 40 300 x DN 50 150		Pressure Limit 1, 2
(kPa)5102		Dimensions 2
"A" x "B" x "C"
(mm ± 1.6)123.8 x 120.7 x 341.1		Approximate Weight 2
(kg)17.7
Inlet and Outlet Code35☆Inlet and Outlet Size
(mm) DN 40 600 x DN 50 150		Pressure Limit 1, 2
(kPa)10204		Dimensions 2
"A" x "B" x "C"
(mm ± 1.6)123.8 x 120.7 x 341.1		Approximate Weight 2
(kg)17.7
Inlet and Outlet Code36☆Inlet and Outlet Size
(mm) DN 40 900 x DN 50 300		Pressure Limit 1, 2
(kPa)15306		Dimensions 2
"A" x "B" x "C"
(mm ± 1.6)149.2 x 139.7 x 366.5		Approximate Weight 2
(kg)21.3
Inlet and Outlet Code36.1☆Inlet and Outlet Size
(mm) DN 40 1500 x DN 50 300		Pressure Limit 1, 2
(kPa)25545		Dimensions 2
"A" x "B" x "C"
(mm ± 1.6)149.2 x 139.7 x 366.5		Approximate Weight 2
(kg)21.3
Inlet and Outlet Code36.2☆Inlet and Outlet Size
(mm) DN 40 2500 x DN 50 300		Pressure Limit 1, 2
(kPa)31026		Dimensions 2
"A" x "B" x "C"
(mm ± 1.6)149.2 x 139.7 x 366.5		Approximate Weight 2
(kg)26.3

1Pressure limit may be subject to system conditions and temperatures.
2Pressure limit, weight, and “C” dimension may vary with sour gas service and other options.
☆Flange dimensions compliant with API 526.