Please ensure Javascript is enabled for purposes of website accessibility

9500 Liquid Modulating “P” Orifice

think…mercer first®

9500 Liquid Modulating "P" Orifice | Model Specifications
OrificeP
(USC)
P
(SI)
OrificeStandard Inlet SizesP
(USC)
4"
P
(SI)
100 DN
OrificeInlet and Outlet Connection TypesP
(USC)
RF x RF,
RTJ x RF,
RTJ x RTJ
P
(SI)
RF x RF,
RTJ x RF,
RTJ x RTJ
OrificeActual Orifice DiameterP
(USC)
3.000 in
P
(SI)
76.2 mm
OrificeActual Orifice AreaP
(USC)
7.069 in2
P
(SI)
4560.6 mm2
OrificeAPI Orifice AreaP
(USC)
6.380 in2
P
(SI)
4116.1 mm2
OrificePressure RangeP
(USC)
15 – 1480 psig
P
(SI)
103 – 10204 kPag
OrificeStandard Temperature RangeP
(USC)
-20°F to 400°F
P
(SI)
-29°C to 204°C
OrificeASME Flow Coefficient, Kd (Liquid)P
(USC)
0.731
P
(SI)
0.731

Mercer Valve Co., Inc. reserves the right to change product designs and specifications without notice.

9500 Liquid Modulating "P" Orifice | Selection

95 -
70
A
P
B
1
C
3
D
0
E
7
F
 
G
L
H
 
I
 
J

A | INLET & OUTLET COMBINATION

(See Dimensions & Weights, below.)

B | API ORIFICE SIZE

P – 7.069 in²

C | FLANGE TYPE

1★ – RF x RF
2 – RTJ x RTJ
3 – RTJ x RF

D | BODY MATERIAL

3★ – WCB CARBON STEEL
4 – CF3M STAINLESS STEEL
5 – LCC CARBON STEEL

E | OPTIONS

0★ – NO OPTIONS
1 – BACKFLOW PREVENTER
2 – PRESSURE SNUBBER (Not available in Liquid Service.)
3 – AUXILIARY PILOT FILTER
4 – OPTIONS 1 & 2
5 – OPTIONS 1 & 3
6 – OPTIONS 2 & 3
7 – OPTIONS 1, 2, & 3

F | SEAT MATERIAL┼┼

7★ – PTFE
8 – FKM
N – NEOPRENE
B – BUNA-N
E – EPDM

G | SOUR SERVICE

BLANK★ – NON SOUR APPLICATIONS
N – SOUR SERVICE

H | PILOT TYPE

M★ – LIQUID MODULATING PILOT (See below for part numbering breakdown.)

I | O-RING MATERIAL┼┼

BLANK★ – STANDARD IF APPLICABLE
3 – PC BUNA
5 – LOW TEMP BUNA
6 – FFKM
7 – FKM ED
9 – NEOPRENE
C – EPDM
K – HNBR

J | TWO-DIGIT "SPECIAL" CODE

(Two-digit special codes assigned by Mercer Valve, if applicable.)

★Standard Materials or Options.
┼┼O-ring codes are only used with Seat codes 7, 9, & Y when O-rings are not standard FKM. If using the standard FKM O-rings, leave O-ring code BLANK.

9500 Liquid Modulating Pilot Valve | Selection

L1 -
A
2
B
1
C
0
D
0
E
0
F
07
G
 
H
 
I
 
J

A | MODULE PRESSURE CODE

L1★ – SET PRESSURE 15 to 85 PSIG
L2★ – SET PRESSURE 86 to 175 PSIG
L3★ – SET PRESSURE 176 to 450 PSIG
L5★ – SET PRESSURE 451 to 750 PSIG
L6★ – SET PRESSURE 751 to 1480 PSIG

B | BODY MATERIAL

1★ – CARBON STEEL
2 – 316 STAINLESS STEEL

C | MODULATING PILOT MODULES┼┼

1★ – FKM
2 - EPDM
3 - BUNA
4 - FFKM
5 - PC BUNA

D | BLOWDOWN TYPE

0★ – NONE
1 - MANUAL BLOWDOWN VALVE╋
2 - REMOTE BLOWDOWN VALVE╋
3 - LIFT LEVER

E | FIELD TEST CONNECTION

0★ – NONE
1 - STANDARD

F | TEST ACCESSORIES

0★ – NONE
1 - TEST GAG

G | SPRING CODE

(Spring codes assigned by Mercer Valve.)

H | SOUR SERVICE

BLANK★ – NON SOUR APPLICATIONS
N – SOUR SERVICE

I | ORING MATERIAL┼┼

BLANK★ – STANDARD IF APPLICABLE

J | TWO-DIGIT "SPECIAL" CODE

(Two-digit special codes assigned by Mercer Valve, if applicable.)

★Standard Materials or Options.
▼Module Seal codes 2, 3, 4 & 5 receive like material O-rings and Exhaust Seats. Consult Factory.
╋May require a Special Code on the Main Valve. Consult Factory.

9500 Liquid Modulating "P" Orifice | Dimensions & Weights (USC)
Inlet and Outlet CodeInlet and Outlet Size
(in)
Pressure Limit 1, 2
(psig)
Dimensions 2
"A" x "B" x "C"
(in ± .062)
Approximate Weight 2
(lbs)
Inlet and Outlet Code70☆Inlet and Outlet Size
(in)
4" 150 x 6" 150
Pressure Limit 1, 2
(psig)
285
Dimensions 2
"A" x "B" x "C"
(in ± .062)
7.750 x 8.250 x 25.253
Approximate Weight 2
(lbs)
213
Inlet and Outlet Code71☆Inlet and Outlet Size
(in)
4" 300 x 6" 150
Pressure Limit 1, 2
(psig)
740
Dimensions 2
"A" x "B" x "C"
(in ± .062)
7.750 x 8.250 x 25.253
Approximate Weight 2
(lbs)
222
Inlet and Outlet Code72☆Inlet and Outlet Size
(in)
4" 600 x 6" 150
Pressure Limit 1, 2
(psig)
1425
Dimensions 2
"A" x "B" x "C"
(in ± .062)
7.750 x 8.250 x 25.253
Approximate Weight 2
(lbs)
231
Inlet and Outlet Code72.1☆Inlet and Outlet Size
(in)
4" 600 x 6" 300
Pressure Limit 1, 2
(psig)
1480
Dimensions 2
"A" x "B" x "C"
(in ± .062)
9.812 x 9.188 x 27.315
Approximate Weight 2
(lbs)
255
Inlet and Outlet Code73.1☆Inlet and Outlet Size
(in)
4" 900 x 6" 300
Pressure Limit 1, 2
(psig)
1480
Dimensions 2
"A" x "B" x "C"
(in ± .062)
9.812 x 9.188 x 27.135
Approximate Weight 2
(lbs)
295
Inlet and Outlet Code73.2☆Inlet and Outlet Size
(in)
4" 1500 x 6" 300
Pressure Limit 1, 2
(psig)
1480
Dimensions 2
"A" x "B" x "C"
(in ± .062)
Approximate Weight 2
(lbs)
Inlet and Outlet Code72.1XInlet and Outlet Size
(in)
4" 600 x 6" 300 x 6" 300
Pressure Limit 1, 2
(psig)
1480
Dimensions 2
"A" x "B" x "C"
(in ± .062)
Approximate Weight 2
(lbs)
Inlet and Outlet Code73.1XInlet and Outlet Size
(in)
4" 900 x 6" 300 x 6" 300
Pressure Limit 1, 2
(psig)
1480
Dimensions 2
"A" x "B" x "C"
(in ± .062)
Approximate Weight 2
(lbs)
Inlet and Outlet Code73.2XInlet and Outlet Size
(in)
4" 1500 x 6" 300 x 6" 300
Pressure Limit 1, 2
(psig)
1480
Dimensions 2
"A" x "B" x "C"
(in ± .062)
Approximate Weight 2
(lbs)

1Pressure limit may be subject to system conditions and temperatures.
2Pressure limit, weight, and “C” dimension may vary with sour service and other options.
☆Flange dimensions compliant with API 526.

9500 Liquid Modulating "P" Orifice | Dimensions & Weights (SI)
Inlet and Outlet CodeInlet and Outlet Size
DN (mm)
Pressure Limit 1, 2
(kPag)
Dimensions 2
"A" x "B" x "C"
(mm ± 1.6)
Approximate Weight 2
(kg)
Inlet and Outlet Code70☆Inlet and Outlet Size
DN (mm)
DN 100 150 x DN 150 150
Pressure Limit 1, 2
(kPag)
1965
Dimensions 2
"A" x "B" x "C"
(mm ± 1.6)
196.9 x 209.6 x 441.3
Approximate Weight 2
(kg)
96.6
Inlet and Outlet Code71☆Inlet and Outlet Size
DN (mm)
DN 100 300 x DN 150 150
Pressure Limit 1, 2
(kPag)
5102
Dimensions 2
"A" x "B" x "C"
(mm ± 1.6)
196.9 x 209.6 x 441.3
Approximate Weight 2
(kg)
100.7
Inlet and Outlet Code72☆Inlet and Outlet Size
DN (mm)
DN 100 600 x DN 150 150
Pressure Limit 1, 2
(kPag)
9825
Dimensions 2
"A" x "B" x "C"
(mm ± 1.6)
196.9 x 209.6 x 441.3
Approximate Weight 2
(kg)
104.8
Inlet and Outlet Code72.1☆Inlet and Outlet Size
DN (mm)
DN 100 600 x DN 150 300
Pressure Limit 1, 2
(kPag)
10204
Dimensions 2
"A" x "B" x "C"
(mm ± 1.6)
233.4 x 233.4 x 495.3
Approximate Weight 2
(kg)
115.7
Inlet and Outlet Code73.1☆Inlet and Outlet Size
DN (mm)
DN 100 900 x DN 150 300
Pressure Limit 1, 2
(kPag)
10204
Dimensions 2
"A" x "B" x "C"
(mm ± 1.6)
233.4 x 233.4 x 495.3
Approximate Weight 2
(kg)
124.7
Inlet and Outlet Code73.2☆Inlet and Outlet Size
DN (mm)
DN 100 1500 x DN 150 300
Pressure Limit 1, 2
(kPag)
10204
Dimensions 2
"A" x "B" x "C"
(mm ± 1.6)
Approximate Weight 2
(kg)
Inlet and Outlet Code72.1XInlet and Outlet Size
DN (mm)
DN 100 600 x DN 150 300 x DN 150 300
Pressure Limit 1, 2
(kPag)
10204
Dimensions 2
"A" x "B" x "C"
(mm ± 1.6)
Approximate Weight 2
(kg)
Inlet and Outlet Code73.1XInlet and Outlet Size
DN (mm)
DN 100 900 x DN 150 300 x DN 150 300
Pressure Limit 1, 2
(kPag)
10204
Dimensions 2
"A" x "B" x "C"
(mm ± 1.6)
Approximate Weight 2
(kg)
Inlet and Outlet Code73.2XInlet and Outlet Size
DN (mm)
DN 100 1500 x DN 150 300 x DN 150 300
Pressure Limit 1, 2
(kPag)
10204
Dimensions 2
"A" x "B" x "C"
(mm ± 1.6)
Approximate Weight 2
(kg)

1Pressure limit may be subject to system conditions and temperatures.
2Pressure limit, weight, and “C” dimension may vary with sour service and other options.
☆Flange dimensions compliant with API 526.