Please ensure Javascript is enabled for purposes of website accessibility
9609 NW 4TH ST. OKLAHOMA CITY, OK 73127
(800) 833-6402
Contact Us

9100 Threaded “H” Orifice

Back to Products

think…mercer first®

9100 Threaded “H” Orifice
9100 Threaded-H Side
9100 Threaded-H Front
9100 H THD - Cutaway - Outline NEW
9100 Threaded “H” Orifice
9100 Threaded-H Side
9100 Threaded-H Front
9100 H THD - Cutaway - Outline NEW

Features:

  • Designed with "Auto Seat Technology"®
  • A low rated and fully guided spring allows for more consistent Set Pressures from pop to pop.
  • Consistent Set Pressures allows for repeatable use without the need for excessive repairs or resetting.
  • Open, Close, Seat and Seal™
  • Fully guided disk for the proper alignment, opening and closing, and reseating of the valve.
  • Mechanical Stop prevents wear on parts and controls valve lift.
  • Pop Action relief allows the valve to go to full lift at Set Pressure. This helps with DOT regulated applications.
  • Non-rising stems allowing valves to be installed in small areas.
  • Sour Service Trim available.
  • Additional options available to meet NACE MR0175 requirements.
  • Canadian Registration Number (CRN)
  • Additional options available to meet Conformité Européenne (CE) to PED Directive 2014/68/EU and/or ATEX Directive 2014/34/EU
Valve Shipping Flyers Repair Kit Flyers IOM Manuals Selection Dimensions
9100 Threaded "H" | Model Specifications
OrificeH
(USC)		H
(SI)
OrificeStandard Inlet Sizes H
(USC)1 ½", 2"		H
(SI)DN 40, DN 50
OrificeInlet and Outlet Connection Types Available H
(USC)Male NPT x Female NPT
or
Female NPT x Female NPT		H
(SI)Male NPT x Female NPT
or
Female NPT x Female NPT
OrificeActual Orifice Diameter H
(USC)1.050 in		H
(SI)26.7 mm
OrificeActual Orifice Area H
(USC)0.865 in2		H
(SI)558.1 mm2
OrificeAPI Orifice Area H
(USC)0.785 in2		H
(SI)506.5 mm2
OrificePressure Range H
(USC)10 – 2000 psig		H
(SI)68 – 13789 kPa
OrificeStandard Temperature Range H
(USC)-20°F to 400°F		H
(SI)-29°C to 204°C
OrificeASME Flow Coefficient Kd (Gas) H
(USC)0.818		H
(SI)0.818
OrificeASME Flow Coefficient Kd (Liquid) H
(USC)0.707		H
(SI)0.707

Mercer Valve Co., Inc. reserves the right to change product designs and specifications without notice.

9100 Threaded "H" | Part Number Selection

91 -
34
A
H
B
5
C
1
D
T
E
85
F
U
G
1
H
 
I

A | INLET & OUTLET COMBINATION

(See Dimensions & Weights, below.)

B | API ORIFICE LETTER

H – 0.865 in²

C | INLET BASE & BODY MATERIAL

5★ – CARBON STEEL / WCB CARBON STEEL
7 – 316 STAINLESS STEEL / CF3M STAINLESS STEEL
R – 316 STAINLESS STEEL / LCC CARBON STEEL

D | CAP TYPE

1★ – CLOSED CAP
2 – OPEN LIFT LEVER
3 – CLOSED LIFT LEVER

E | SEAT MATERIAL

V★ – FKM
T★ – PTFE
P★ – VIRGIN PEEK
B – BUNA-N
E – EPDM
N – NEOPRENE
X – FFKM
Y – VESPEL®
L – PC BUNA
F – FKM (LOW TEMP)

F | SPRING CODE

(Spring codes assigned by Mercer Valve.)

G | TRIM CODES

U★ – 316 S.S. DISK & NOZZLE (GAS SERVICE ≤ 1050 PSIG)
C★ – 440C S.S. DISK, 17-4 S.S. NOZZLE (GAS SERVICE > 1050 PSIG)
L★ – 316 S.S. DISK & NOZZLE (LIQUID SERVICE)
N★ – 316 S.S DISK & NOZZLE (SOUR GAS SERVICE)
B★ – 316 S.S. DISK & NOZZLE (SOUR LIQUID SERVICE)
X – ALL 316 S.S. (OPTIONAL GAS SERVICE)
LX – ALL 316 S.S. (OPTIONAL LIQUID SERVICE)
BX – ALL 316 S.S. (OPTIONAL SOUR LIQUID SERVICE)
NX – ALL 316 S.S. (OPTIONAL SOUR GAS SERVICE)

H | O-RING MATERIAL

1★ – FKM & BUNA-N (STANDARD)
2 – FKM 75 DURO
3 – FKM 90 DURO
4 – BUNA-N 70 DURO
5 – BUNA-N 75 DURO (LOW TEMP)
7 – FFKM
9 – NEOPRENE
A – CHEMRAZ®
C – EPDM 80 DURO
D – EPDM 90 DURO
G – TFE/P
H – SILICONE
J – FLUOROSILICONE
K – HNBR
L – PC BUNA
M – FKM ED
P – FKM 75 DURO (LOW TEMP)

I | TWO-DIGIT "SPECIAL" CODE

(Two-digit special codes assigned by Mercer Valve, if applicable.)

★Standard Materials or Options.

9100 Threaded "H" | Dimensions & Weights (USC)
Inlet and Outlet Code Inlet and Outlet Size
(in)		Pressure Limit 1, 2
(psig)		Dimensions 2
"A" x "B" x "C"
(in ± .062)		Approximate Weight 2
(lbs)
Inlet and Outlet Code 33Inlet and Outlet Size
(in)1 ½" FNPT x 2" FNPT		Pressure Limit 1, 2
(psig)850		Dimensions 2
"A" x "B" x "C"
(in ± .062)2.875 x 3.000 x 10.625		Approximate Weight 2
(lbs)22.5
Inlet and Outlet Code 34★Inlet and Outlet Size
(in)1 ½" MNPT x 2" FNPT		Pressure Limit 1, 2
(psig)850		Dimensions 2
"A" x "B" x "C"
(in ± .062)4.250 x 3.000 x 12.000		Approximate Weight 2
(lbs)24
Inlet and Outlet Code 42Inlet and Outlet Size
(in)2" FNPT x 2" FNPT		Pressure Limit 1, 2
(psig)850		Dimensions 2
"A" x "B" x "C"
(in ± .062)2.875 x 3.000 x 10.625		Approximate Weight 2
(lbs)24
Inlet and Outlet Code 43★Inlet and Outlet Size
(in)2" MNPT x 2" FNPT		Pressure Limit 1, 2
(psig)850		Dimensions 2
"A" x "B" x "C"
(in ± .062)4.250 x 3.000 x 12.000		Approximate Weight 2
(lbs)25
Inlet and Outlet Code 46Inlet and Outlet Size
(in)2" FNPT x 2½" FNPT		Pressure Limit 1, 2
(psig)2000		Dimensions 2
"A" x "B" x "C"
(in ± .062)2.875 x 3.000 x 13.188		Approximate Weight 2
(lbs)26.5
Inlet and Outlet Code 47★Inlet and Outlet Size
(in)2" MNPT x 2½" FNPT		Pressure Limit 1, 2
(psig)2000		Dimensions 2
"A" x "B" x "C"
(in ± .062)4.250 x 3.000 x 14.563		Approximate Weight 2
(lbs)29
Inlet and Outlet Code 51Inlet and Outlet Size
(in)2" FNPT x 3" FNPT		Pressure Limit 1, 2
(psig)2000		Dimensions 2
"A" x "B" x "C"
(in ± .062)2.875 x 5.250 x 10.625		Approximate Weight 2
(lbs)
Inlet and Outlet Code 52Inlet and Outlet Size
(in)2" MNPT x 3" FNPT		Pressure Limit 1, 2
(psig)2000		Dimensions 2
"A" x "B" x "C"
(in ± .062)4.250 x 5.250 x 12.000		Approximate Weight 2
(lbs)

1Pressure limit may be subject to system conditions and temperatures.
2Pressure limit, weight, and “C” dimension may vary with sour gas service and other options.
★Standard Materials or Options.

9100 Threaded "H" | Dimensions & Weights (SI)
Inlet and Outlet CodeInlet and Outlet Size
DN (mm)		Pressure Limit 1, 2
(kPa)		Dimensions 2
"A" x "B" x "C"
(mm ± 1.6)		Approximate Weight 2
(kg)
Inlet and Outlet Code33Inlet and Outlet Size
DN (mm)DN 40 (FNPT) x DN 50 (FNPT)		Pressure Limit 1, 2
(kPa)5860		Dimensions 2
"A" x "B" x "C"
(mm ± 1.6)76.2 x 76.2 x 273.1		Approximate Weight 2
(kg)10.2
Inlet and Outlet Code34★Inlet and Outlet Size
DN (mm)DN 40 (MNPT) x DN 50 (FNPT)		Pressure Limit 1, 2
(kPa)5860		Dimensions 2
"A" x "B" x "C"
(mm ± 1.6)108.0 x 76.2 x 304.8		Approximate Weight 2
(kg)10.9
Inlet and Outlet Code42Inlet and Outlet Size
DN (mm)DN 50 (FNPT) x DN 50 (FNPT)		Pressure Limit 1, 2
(kPa)5860		Dimensions 2
"A" x "B" x "C"
(mm ± 1.6)76.2 x 76.2 x 273.1		Approximate Weight 2
(kg)10.9
Inlet and Outlet Code43★Inlet and Outlet Size
DN (mm)DN 50 (MNPT) x DN 50 (FNPT)		Pressure Limit 1, 2
(kPa)5860		Dimensions 2
"A" x "B" x "C"
(mm ± 1.6)108.0 x 76.2 x 304.8		Approximate Weight 2
(kg)11.3
Inlet and Outlet Code46Inlet and Outlet Size
DN (mm)DN 50 (FNPT) x DN 65 (FNPT)		Pressure Limit 1, 2
(kPa)13789		Dimensions 2
"A" x "B" x "C"
(mm ± 1.6)76.2 x 76.2 x 333.4		Approximate Weight 2
(kg)12.0
Inlet and Outlet Code47★Inlet and Outlet Size
DN (mm)DN 50 (MNPT) x DN 65 (FNPT)		Pressure Limit 1, 2
(kPa)13789		Dimensions 2
"A" x "B" x "C"
(mm ± 1.6)108.0 x 76.2 x 333.4		Approximate Weight 2
(kg)13.2
Inlet and Outlet Code51Inlet and Outlet Size
DN (mm)DN 50 (FNPT) x DN 80 (FNPT)		Pressure Limit 1, 2
(kPa)13789		Dimensions 2
"A" x "B" x "C"
(mm ± 1.6)72.6 x 113.4 x 270.0		Approximate Weight 2
(kg)
Inlet and Outlet Code52Inlet and Outlet Size
DN (mm)DN 50 (MNPT) x DN 80 (MNPT)		Pressure Limit 1, 2
(kPa)13789		Dimensions 2
"A" x "B" x "C"
(mm ± 1.6)108.0 x 113.4 x 304.8		Approximate Weight 2
(kg)

1Pressure limit may be subject to system conditions and temperatures.
2Pressure limit, weight, and “C” dimension may vary with sour gas service and other options.
★Standard Materials or Options.